|
Laboratory Open-Cell Copper Foam, 110 PPI, 200 × 200 × 5 mm, 1/5 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For PPI selection, sheet-dimension confirmation, package support or application-specific configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Store the copper foam sheets in a clean, dry area to prevent contamination and oxidation of the high-surface-area copper network. Protect the open cellular structure from heavy impact, crushing, and physical deformation that can collapse the pore architecture.
- Storage and Environmental Constraint: Store sheets in a clean, dry environment to avoid pore blockage by dust or debris and to minimize surface oxidation of the copper framework.
- Mechanical Protection Constraint: Protect the open-cell structure from heavy impact or crushing forces that would permanently collapse the interconnected pore network and reduce through-pore rate.
- Contamination Prevention Constraint: Prevent contact with oils, greases, or corrosive chemicals that can contaminate the high-surface-area copper and degrade performance in electrode or catalyst applications.
Inspect the copper foam sheet immediately after delivery to verify dimensional conformance and structural integrity before integration. Handle the sheet with care to preserve the open-pore network for its intended application.
Required Equipment: Clean, lint-free gloves, Clean, flat inspection surface
- Inspect packaging and sheet condition
Examine the outer package for signs of crushing or damage, then open it on a clean, flat surface. - Verify sheet dimensions
Measure the sheet length, width, and thickness with a calibrated ruler or caliper to confirm they match the 200 × 200 × 5 mm specification. - Visually assess pore structure
Inspect the open-cell network under adequate lighting to confirm a uniform pore distribution and the absence of visible crushed or blocked regions. - Handle and store the sheet
Transfer the sheet to its storage location using clean gloves, placing it on a flat, dry surface away from potential impact sources.
How does the 110 PPI pore density of this copper foam affect its suitability for electrode versus filtration applications?
The 110 PPI (0.23 mm nominal pore pitch) copper foam provides a high surface area open network ideal for electrode frameworks and catalyst supports, where high internal surface exposure is critical. For filtration applications, the ≥98% through-pore rate and 50–80% porosity ensure low flow resistance, but the 0.23 mm pore pitch means it is best suited for fine particulate filtration. The trade-off between pore density and fluid permeability should be evaluated against the specific application's pore size and pressure drop requirements.
What integration considerations are important when using this copper foam as a current collector in nickel-zinc batteries?
When integrating this 110 PPI copper foam as a current collector for nickel-zinc battery electrodes, the bulk density range of 0.1–0.8 g/cm³ and the copper framework's support for electrical-conduction applications enable efficient current collection. The interconnected open pore network with ≥98% through-pore rate facilitates electrolyte penetration and active material loading. The selection guidance advises confirming pore geometry and integration requirements before ordering, as the 5 mm thickness and 200×200 mm sheet size may need custom cutting or shaping.
What are the recommended storage and handling procedures for this copper foam sheet to maintain its structural integrity?
Store the copper foam sheets in a clean, dry area and protect the open cellular surface from heavy impact, crushing, and contamination. After delivery, inspect the package condition, sheet dimensions, and visible pore structure before cutting, bonding, or installing the material. These precautions preserve the 110 PPI open-cell structure and ≥98% through-pore rate for reliable laboratory evaluations.
This 110 PPI open-cell copper foam sheet (200 × 200 × 5 mm) provides a high through-pore rate (≥98%) and a porosity range of 50–80%, making it suitable for electrode frameworks, catalyst supports, and thermal management applications where interconnected porosity and copper's electrical/thermal conductivity are required.
Positive
- High through-pore rate for fluid access: With a through-pore rate of at least 98%, the open-cell structure ensures nearly all pores are interconnected, maximizing internal surface exposure for electrode, catalyst, or filtration applications.
- Copper framework supports thermal and electrical use: The copper matrix provides inherent thermal and electrical conductivity, enabling evaluation in heat-transfer components, current-collection structures, and electromagnetic shielding without additional conductive coatings.
Trade-offs
- Mechanical fragility from open-cell structure: The open-cell foam is susceptible to crushing or deformation under heavy impact or compressive loads, requiring careful handling and storage in a clean, dry area to preserve pore geometry.
- Porosity variability requires application-specific validation: The stated porosity range of 50–80% and bulk-density range of 0.1–0.8 g/cm³ indicate batch-to-batch variation; users must confirm pore geometry and density against application-critical requirements before integration.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
