|
Laboratory Open-Cell Copper Foam, 110 PPI, 100 × 200 × 3 mm, 1/5 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For PPI selection, sheet-dimension confirmation, package support or application-specific configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Store the sheet in a clean, dry environment to prevent contamination. Protect the open cellular structure from heavy impact, crushing, and physical damage.
- Storage Condition: Store in a clean, dry area to avoid contamination and moisture exposure.
- Physical Protection: Protect the sheet from heavy impact, crushing, and contamination during handling.
How does the 110 PPI pore density of this copper foam affect its trade-off between surface area for electrode applications and fluid permeability for filtration uses?
The 110 PPI specification corresponds to an approximate 0.23 mm nominal pore pitch, yielding high internal surface area suitable for electrode frameworks and catalyst supports, while the ≥98% through-pore rate and wide porosity range of 50–80% maintain good fluid permeability for filtration and heat-dissipation evaluations. The bulk density of 0.1–0.8 g/cm³ provides a lightweight yet conductive copper framework, allowing the material to be tailored by selecting PPI, porosity, and dimensional parameters per application requirements.
What are the key dimensional and structural constraints when integrating this 3 mm thick, 110 PPI open-cell copper foam sheet into a battery electrode assembly?
The sheet dimensions of 100 × 200 × 3 mm with a 110 PPI open-cell structure and 0.23 mm nominal pore pitch are directly applicable as electrode frameworks for nickel-zinc batteries and electric-double-layer capacitors, but integration must account for the fixed 3 mm thickness, pore size of approximately 0.23 mm, and the stated porosity range of 50–80%. The source advises confirming PPI, porosity, through-pore rate, sheet length and width, thickness, bulk-density range, and required quantity before quotation; custom dimensions are available upon consultation for application-specific integration.
What storage and handling precautions are required to prevent damage to the open-cell structure of this 110 PPI copper foam?
Store the sheets in a clean, dry area and protect the open cellular surface from heavy impact, crushing, and contamination. After delivery, inspect the package condition, sheet dimensions, and visible pore structure before cutting, bonding, or installing the material to preserve the interconnected pore network and the ≥98% through-pore rate.
This 110 PPI open-cell copper foam sheet (100×200×3 mm) offers a ≥98% through-pore rate and a porosity range of 50–80%, making it suitable for electrode, catalyst, and thermal management applications where high internal surface area and fluid permeability are required.
Positive
- High through-pore rate: With a stated through-pore rate of at least 98%, the interconnected open network ensures minimal flow resistance and maximum internal surface exposure for fluid-contact applications.
- Tunable porosity and bulk density: A porosity range of 50–80% and bulk density of 0.1–0.8 g/cm³ allow the material to be selected for specific trade-offs between mechanical strength, thermal/electrical conductivity, and void volume.
Trade-offs
- Copper surface oxidation: Copper readily forms an oxide layer in ambient air, particularly at elevated temperatures, which can degrade electrical contact resistance and thermal interface performance unless surface preparation or protective coatings are applied.
- Fragile open-cell structure: The thin copper ligaments and high porosity (up to 80%) make the foam susceptible to crushing, deformation, or pore collapse under mechanical stress, requiring careful handling and storage in a clean, dry environment.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
