|
Laboratory Open-Cell Copper Foam, 40 PPI, 200 × 200 × 10 mm, 1/5 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For PPI selection, sheet-dimension confirmation, package support or application-specific configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Store the sheet in a clean, dry area to prevent contamination and environmental degradation. Protect the open cellular structure from heavy impact, crushing, and contamination to avoid irreversible damage.
- Environmental Storage: Maintain the sheet in a clean, dry environment to avoid moisture-induced oxidation or particulate contamination.
- Mechanical Protection: Shield the foam from heavy impact, crushing loads, and physical contamination that could collapse the open-pore network.
- Pre-Use Inspection: Inspect the package condition, sheet dimensions, and visible pore structure before cutting, bonding, or installing the material.
- Processing Compatibility: Confirm that the intended cutting, bonding, or integration method is compatible with the fragile open-cell copper structure.
Upon receipt, verify the integrity of the foam sheet through visual and dimensional checks. Follow these steps to ensure the material is ready for cutting, bonding, or installation.
- Inspect the Package
Inspect the shipping package for visible damage that could have compromised the foam sheet during transit. - Verify Sheet Dimensions
Measure the sheet length, width, and thickness to confirm they match the ordered specification of 200 × 200 × 10 mm. - Examine Pore Structure
Examine the open-cell pore structure for any crushing, deformation, or contamination that could affect performance.
How does the 40 PPI open-cell structure with a 0.64 mm nominal pore pitch influence the performance of this copper foam in electrode and catalyst applications?
The 40 PPI open-cell structure with a nominal pore pitch of 0.64 mm provides a highly interconnected porous network with a through-pore rate of at least 98%, ensuring high internal surface exposure for electrode and catalyst applications. The stated porosity of 50–80% and bulk density of 0.1–0.8 g/cm³ allow for a balance between surface area and mechanical integrity, making it suitable for use as electrode frameworks, current collectors, and catalyst supports.
What should be considered when integrating this 200×200×10 mm copper foam sheet into a specific application such as filtration or thermal management?
Integration requires confirming the sheet's PPI, nominal pore pitch, porosity, through-pore rate, dimensions, thickness, and bulk density against your application requirements. The foam is suitable for filtration, thermal management, and other systems, but you must verify pore geometry and integration methods (e.g., cutting, bonding, installing) before ordering to ensure compatibility with your specific setup.
What handling and storage precautions are necessary to maintain the integrity of this open-cell copper foam?
Store the sheets in a clean, dry area and protect the open cellular surface from heavy impact, crushing, and contamination. After delivery, inspect the package condition, sheet dimensions, and visible pore structure before cutting, bonding, or installing the material. Custom dimensions are available upon consultation, but these precautions preserve the structural and performance characteristics.
This 40 PPI open-cell copper foam sheet (200×200×10 mm) delivers an interconnected porous network with ≥98% through-pore rate and copper-based thermal/electrical conductivity, making it suitable for electrode, filtration, and thermal management evaluations, though it requires careful handling and pre-order specification verification.
Positive
- High through-pore rate: The stated ≥98% through-pore rate ensures an interconnected open network that supports fluid flow and maximizes internal surface exposure for electrode, catalyst, and filtration applications.
- Copper framework conductivity: The foamed copper structure retains thermal and electrical conduction properties, enabling use in heat-transfer components and current-collection structures without sacrificing the porous architecture.
Trade-offs
- Sensitive to handling and storage: The open cellular surface must be stored in a clean, dry area and protected from heavy impact, crushing, and contamination, as physical damage can compromise pore integrity and performance.
- Pre-order specification verification: Buyers must confirm PPI, pore pitch, porosity, dimensions, bulk density, and quantity before ordering, as the material's suitability depends on exact application-critical pore geometry and integration requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
