|
Zinc Nitride (Zn3N2) Evaporation Material, Pieces, 99.9%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires e-beam evaporation with a compatible liner and high-temperature crucible for thermal evaporation. Matching deposition source hardware and process route to material behavior, melting point, and film requirements is essential for successful thin-film deposition.
- Deposition Source Compatibility: Use e-beam hearth with compatible liner; thermal evaporation requires a high-temperature crucible and must be confirmed via RFQ.
- Physical Form and Size: The material is supplied as pieces sized 1-3 mm, suitable for loading into evaporation sources.
- Material Purity: The 99.9% purity specification supports comparison with standard and high-purity grades for process optimization.
- Density Reference: Density of 6.22 g/cm³ is provided for process control and film thickness calculation.
- Process Matching: Evaporation source hardware and process route must be matched to material behavior, melting point, and film requirements.
How does the density of 6.22 g/cm³ for Zn3N2 evaporation material affect process parameters in E-beam deposition?
The density of 6.22 g/cm³ is a key parameter for calculating material consumption and deposition rate in E-beam evaporation. It directly influences the mass-to-volume ratio for source loading and helps estimate the required quantity for a given film thickness. The product specification lists this density to enable accurate process matching and source geometry planning.
What liner or crucible material is recommended for evaporating Zn3N2 to maintain film purity?
The product description indicates that molybdenum (Mo) is the recommended liner material for Zn3N2 evaporation, as shown in the hardware compatibility table. Molybdenum provides chemical inertness at typical evaporation temperatures, minimizing contamination risk. For high-temperature processes, a crucible may be required and is available by request for quotation (RFQ).
What safety and documentation checks are required before using Zn3N2 evaporation material in a laboratory?
The product documentation advises reviewing the certificate of analysis, safety data sheet (SDS), shipment conditions, and export requirements before handling. The SDS contains handling and storage precautions, while the certificate verifies the 99.9% purity and material identity. These checks ensure safe laboratory use and compliance with institutional regulations.
Zinc Nitride (Zn3N2) evaporation material in 1-3 mm pieces at 99.9% purity is evaluated for E-beam evaporation deposition, with a density of 6.22 g/cm³ and preferred use with a molybdenum liner or high-temperature crucible by RFQ; thermal evaporation feasibility requires inquiry.
Positive
- Defined material identity and purity: Zinc Nitride (Zn3N2) at 99.9% purity with specified 1-3 mm piece form enables direct procurement matching for E-beam evaporation workflows without ambiguity in composition or particle size.
- Multiple pack sizes for scalability: Available in 100g, 500g, and 1kg pack sizes allows researchers to scale deposition runs from small proof-of-concept to larger batch production while maintaining consistent material specification.
Trade-offs
- E-beam evaporation preferred; thermal limited: Evaporation method is specified as E-beam preferred with thermal feasibility requiring RFQ, indicating potential incompatibility with standard thermal evaporation sources without custom crucible or process validation.
- Hardware compatibility requires confirmation: Deposition source geometry, liner material (Mo recommended), and crucible type must be confirmed before ordering, as the material may require high-temperature crucible by RFQ for certain configurations.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
