|
Silicon Selenide (SiSe) Evaporation Material, Pieces, 99.99%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires careful matching of deposition source hardware and process route to material behavior and melting point. Compatible crucibles include quartz, alumina, graphite, tantalum, tungsten boats, or Knudsen cells, with thermal evaporation or low-power e-beam methods.
- Deposition Source Compatibility: Use only quartz, alumina, or graphite crucibles, Ta/W boats, or Knudsen cells as specified for this material.
- Evaporation Method: Apply thermal evaporation or low-power e-beam methods as appropriate for the material's properties.
- Physical Form Handling: The 1-3 mm pieces are designed for direct loading into evaporation sources without further size reduction.
- Process Matching: Match the evaporation parameters to the material's melting point and desired film properties for optimal results.
What crucible or boat materials are recommended for evaporating Silicon Selenide (SiSe) pieces, and is a Knudsen cell supported?
SiSe evaporation material is compatible with quartz, alumina, or graphite crucibles, as well as Ta or W boats for thermal evaporation or low-power e-beam. A Knudsen cell is also listed as an option but only by RFQ, meaning a custom configuration and process evaluation are required. The source emphasizes confirming deposition-source compatibility before quotation.
How does the 1–3 mm piece size of SiSe evaporation material influence deposition performance in vacuum thin-film processes?
The 1–3 mm piece size is specified to support controlled source loading and consistent evaporation rates, reducing the risk of splattering compared to finer powders while enabling efficient packing in crucibles or boats. This size range is selected for deposition-process review and is a key parameter for matching material behavior to thermal or e-beam evaporation hardware.
What documentation and safety steps are required before handling SiSe evaporation material in a laboratory setting?
Before using SiSe, the source advises reviewing the certificate of analysis, safety data sheet (SDS), shipment conditions, and export requirements. These documents cover safe handling, storage, and disposal procedures, as well as purity verification, and should be matched to the specific laboratory use requirements and local regulations.
Silicon Selenide (SiSe) evaporation material in 99.99% purity, 1-3 mm pieces, is evaluated for thermal evaporation or low-power e-beam deposition. The defined composition and piece form support controlled source loading, but the material's compatibility with specific crucibles and boats requires RFQ confirmation, and the 1-3 mm size range may limit uniform evaporation in certain source geometries.
Positive
- High purity for film integrity: 99.99% purity specification minimizes contamination in deposited thin films, supporting reproducible optical or electronic properties in research applications.
- Defined physical form for loading: Supplied as 1-3 mm pieces, the material facilitates consistent source loading and controlled evaporation rates in thermal or low-power e-beam systems.
Trade-offs
- Source compatibility requires RFQ: Evaporation source hardware (crucible, boat, or Knudsen cell) must be confirmed via RFQ, adding a pre-purchase engineering step to ensure material compatibility with existing deposition equipment.
- Particle size may limit uniformity: The 1-3 mm piece size range can lead to uneven thermal distribution or incomplete evaporation in small or tightly confined sources, potentially affecting film thickness uniformity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
