|
Silicon Boride (SiB6) Evaporation Material, Powder, 99%, 1-5 µm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires careful matching of evaporation source hardware to its specific particle size and poor e-beam performance. Proper crucible selection and process parameter optimization are essential for successful thin-film deposition.
- Deposition-Source Compatibility: Confirm that the e-beam hearth and liner are compatible with SiB6 powder to avoid contamination or poor evaporation.
- Process Route Matching: Match the material's melting point and evaporation behavior to the chosen deposition method, noting that thermal evaporation requires RFQ for high-temperature crucible.
- E-Beam Performance Consideration: Expect poor e-beam performance and plan for longer deposition times or alternative heating strategies.
- Particle Size Loading: Ensure the 1-5 µm powder is loaded uniformly in the crucible to prevent spitting or uneven evaporation.
- Pre-Use Procurement Verification: Confirm model, purity, form, size range, pack size, and certificate requirements before quotation to avoid compatibility issues.
Why is e-beam evaporation preferred for SiB6 powder but rated with poor performance, and what alternatives exist?
E-beam evaporation is the preferred method for this Silicon Boride (SiB6) powder, but the product specifies 'E-beam performance: Poor,' indicating that standard e-beam conditions may not yield optimal deposition. For thermal evaporation, a request for quotation (RFQ) is required to assess feasibility. Buyers should match the material's melting behavior with their deposition hardware; technical consultation is recommended.
What crucible or liner specifications are required for evaporating SiB6 powder in an e-beam system?
The product requires an e-beam hearth with a compatible liner or a high-temperature crucible obtained by RFQ. The specific liner material is not stated, so buyers must confirm compatibility based on their deposition source geometry, liner material, and the high-temperature requirements of SiB6. RFQ is available for custom crucible solutions.
What documentation and safety considerations are needed for handling SiB6 powder with 1–5 µm particle size?
The product description advises reviewing the certificate, safety data sheet (SDS), shipment conditions, and export requirements against laboratory use. Although explicit storage conditions are not listed, the fine powder (1–5 µm) may require standard precautions against airborne particulates. Buyers should request the SDS for detailed handling and storage guidance.
Silicon Boride (SiB6) evaporation material in powder form (99%, 1-5 µm) is evaluated for E-beam evaporation, with poor E-beam performance noted and thermal evaporation requiring RFQ feasibility assessment, making it suitable only for specialized deposition workflows where hardware compatibility is confirmed.
Positive
- Defined material identity and purity: Silicon Boride (SiB6) at 99% purity with 1-5 µm particle size enables clear procurement matching for vacuum thin-film deposition, supporting standard and RFQ-controlled grade comparisons.
- Multiple pack sizes for lab scaling: Available in 25g, 100g, 500g, and 1kg packs allows incremental procurement from small-scale R&D to pilot production without over-ordering.
Trade-offs
- Poor E-beam evaporation performance: E-beam evaporation performance is rated as Poor, requiring a compatible liner and high-temperature crucible by RFQ, limiting direct deployment without hardware validation.
- Thermal evaporation feasibility requires RFQ: Thermal evaporation is not confirmed as feasible without a request for quotation, adding a pre-purchase engineering step to assess process compatibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
