|
Molybdenum Silicide (MoSi2) Evaporation Material, Pieces, 99.95%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Molybdenum silicide evaporation material requires deposition-source compatibility with E-beam hearths lined with appropriate materials. Process routes must be matched to the material's physical properties and target film specifications.
- E-beam Evaporation Source Compatibility: Use an E-beam hearth with a compatible liner; consult for high-temperature crucible options if thermal evaporation is required.
- Process Route Matching: Match the evaporation source hardware and process parameters to the material's melting point, density, and Z-ratio for reliable film deposition.
- Procurement Compatibility Verification: Confirm model, purity, form, size range, pack size, and deposition-source compatibility before quotation to ensure proper use.
What is the Z-ratio of this MoSi2 evaporation material and how does it affect thin-film deposition control?
The Z-ratio is specified as 1.00 for this 99.95% pure MoSi2 pieces. A Z-ratio of 1.00 indicates direct correlation between the deposition rate and the quartz crystal monitor reading, simplifying thickness control during E-beam evaporation. This aligns with the recommended E-beam evaporation method and the piece size of 1-3 mm for source loading.
What evaporation source hardware is recommended for these MoSi2 pieces, and is thermal evaporation feasible?
E-beam evaporation is the preferred method for this MoSi2 material, requiring an E-beam hearth with a compatible liner. For thermal evaporation, a high-temperature crucible is required; feasibility should be confirmed via RFQ. The 1-3 mm piece size is designed for E-beam source loading, and the melting point of 2,050 °C necessitates robust hardware.
What documentation is available to verify the purity and safe handling of these MoSi2 evaporation pieces?
A certificate of analysis, safety data sheet, and shipment condition details are available upon request to confirm the 99.95% purity specification and assess laboratory safety requirements. Buyers should review these documents against their application and export regulations before ordering.
Molybdenum Silicide (MoSi2) evaporation material supplied as 99.95% pure pieces with 1–3 mm sizing, optimized for e-beam evaporation workflows requiring defined stoichiometry and controlled particle loading. The high melting point (2050°C) and unit Z-ratio (1.00) simplify thickness monitoring but necessitate high-temperature crucible compatibility and RFQ confirmation for thermal evaporation routes.
Positive
- High purity 99.95%: Defined material composition and 99.95% purity support reproducible thin-film deposition with minimal impurity-related defects in MoSi2 coatings.
- Controlled particle size 1–3 mm: Piece form with 1–3 mm size range enables consistent loading into e-beam hearths and predictable evaporation behavior under vacuum.
Trade-offs
- E-beam preferred; thermal requires RFQ: Evaporation is optimized for e-beam hearths with compatible liners; thermal evaporation feasibility requires request-for-quotation, adding procurement lead time.
- High melting point 2050°C: The 2050°C melting point demands high-temperature crucible hardware and careful thermal management, increasing infrastructure requirements for deposition.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
