|
Lead Iodide (PbI2) Evaporation Material, Pieces, 99.9%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Lead iodide evaporation material requires moisture-controlled handling and storage to prevent degradation. Deposition must use compatible boat or crucible materials to avoid contamination and ensure film quality.
- Moisture Sensitivity: Store and handle lead iodide under dry, inert atmosphere to prevent hydrolysis or decomposition.
- Evaporation Source Compatibility: Use W, Mo, or Ta boats or graphite/alumina crucibles to avoid chemical reaction with molten lead iodide.
- Deposition Method: Thermal or resistive evaporation is preferred; electron-beam evaporation requires RFQ confirmation.
- Particle Size Specification: The 1-3 mm piece size ensures uniform loading and consistent evaporation rate in the source.
Load lead iodide pieces into a suitable evaporation source under inert atmosphere. Evacuate the chamber and perform thermal evaporation to deposit thin films.
Required Equipment: Glovebox with inert atmosphere, W or Mo boat or graphite crucible, Thermal evaporation system
- Inspect and open container
Inspect the sealed container for moisture and open only in a dry, inert atmosphere. - Load evaporation source
Load the lead iodide pieces into a pre-cleaned W or Mo boat or graphite crucible, ensuring even distribution. - Perform thermal evaporation
Place the loaded boat into the evaporation system and initiate thermal evaporation under vacuum.
What is the recommended evaporation method for PbI2 pieces with a melting point of 402°C?
Thermal/resistive evaporation is the preferred method for PbI2 pieces. E-beam evaporation is available by RFQ. The material has a melting point of 402°C and density of 6.16 g/cm³, which should be matched to the deposition process.
Which boat or crucible materials are compatible with PbI2 evaporation?
Compatible evaporation source materials include W, Mo, or Ta boats, as well as graphite or alumina crucibles. Moisture-controlled handling is required during the evaporation process.
What handling and documentation requirements apply to PbI2 evaporation material?
Moisture-controlled handling is required. Certificate of analysis, safety data sheet, and shipment conditions should be reviewed against laboratory use requirements.
Lead Iodide (PbI2) evaporation material in pieces (1–3 mm, 99.9% purity) is designed for thermal/resistive evaporation using W/Mo/Ta boats or graphite/alumina crucibles; e-beam deposition requires RFQ. Moisture-controlled handling is mandatory, and pack sizes from 100 g to 1 kg support scalable deployment.
Positive
- Defined purity and particle size: 99.9% purity and 1–3 mm piece size enable reproducible evaporation rates and consistent film quality in vacuum deposition.
- Scalable pack sizes from 100g to 1kg: Offered in 100 g, 500 g, and 1 kg packs, allowing users to match material quantity to experimental or pilot-scale needs without excess inventory.
Trade-offs
- Moisture-sensitive handling required: Moisture-controlled handling is specified; exposure to ambient humidity may degrade material quality or cause handling difficulties.
- E-beam evaporation not standard: E-beam deposition is available only by RFQ; thermal/resistive evaporation is the preferred method, limiting direct process compatibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
