|
Iron Bromide (FeBr2) Evaporation Material, Pieces, 99.9%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires moisture-controlled handling to prevent degradation during storage and loading. Deposition must use W/Mo/Ta boat or graphite/alumina crucible with thermal evaporation methods matched to the 684°C melting point.
- Moisture Sensitivity: Moisture-controlled handling is required to avoid hydrolysis or oxidation of the material during storage and loading.
- Boat and Crucible Compatibility: Use only W/Mo/Ta boat or graphite/alumina crucible to prevent chemical reaction with the molten material.
- Evaporation Method Constraint: Thermal/resistive evaporation is preferred; e-beam evaporation requires RFQ approval due to potential material behavior differences.
- Particle Size Constraint: The 1-3 mm pieces are sized for consistent source loading and controlled evaporation rate.
- Process Matching Requirement: Evaporation parameters must be matched to the material's melting point and film requirements.
Why is thermal/resistive evaporation preferred over e-beam for Iron Bromide (FeBr2)?
Thermal/resistive evaporation is the preferred method for FeBr2 due to its moderate melting point of 684°C and the material's sensitivity to moisture. E-beam evaporation is available only by RFQ, likely because the high-energy electron beam may cause decomposition or require controlled conditions. The product description specifies 'Thermal/resistive evaporation preferred; e-beam by RFQ'.
What boat or crucible materials are compatible with FeBr2 evaporation?
Compatible evaporation source materials include tungsten (W), molybdenum (Mo), tantalum (Ta) boats, or graphite/alumina crucibles. These materials are specified in the product description under 'Evaporation Source'. The choice depends on the melting point and chemical compatibility with FeBr2.
What handling precautions are required for Iron Bromide (FeBr2) evaporation material?
The product requires moisture-controlled handling during evaporation setup, as indicated in the 'Evaporation Source' specification. FeBr2 is hygroscopic, so exposure to ambient humidity should be minimized to prevent degradation. The product description explicitly states 'moisture-controlled handling'.
Iron Bromide (FeBr2) pieces, 99.9% purity, 1–3 mm size, supplied for thermal/resistive evaporation with moisture-controlled handling; melting point 684°C and density 4.64 g/cm³ require matched source hardware (W/Mo/Ta boat or graphite/alumina crucible) and e-beam deposition available only by RFQ.
Positive
- Defined material identity and form: The product is specified as Iron Bromide (FeBr2) in pieces (1–3 mm), enabling direct matching to deposition source loading and process requirements.
- Purity specification for grade comparison: Listed at 99.9% purity, allowing straightforward comparison between standard, high-purity, and RFQ-controlled grades for thin-film applications.
Trade-offs
- Moisture-sensitive handling required: The product explicitly notes moisture-controlled handling; exposure to ambient humidity may degrade material quality and affect deposition consistency.
- E-beam evaporation by RFQ only: Thermal/resistive evaporation is the preferred method; e-beam deposition is not standard and requires a request-for-quotation, potentially limiting process flexibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
