|
Indium(III) Sulfide (In2S3) Evaporation Material, Pieces, 99.99%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires vacuum deposition systems capable of thermal evaporation or low-power e-beam. It must be loaded into crucibles or boats made from quartz, alumina, graphite, tantalum, or tungsten.
- Evaporation Method: The material must be evaporated using thermal evaporation or low-power e-beam methods only.
- Crucible Compatibility: Compatible crucible materials include quartz, alumina, graphite, tantalum, tungsten, or Knudsen cells.
- Temperature Requirement: The material requires high-temperature evaporation near its melting point of 1050°C.
- Deposition Matching: The evaporation source hardware and process route must be matched to the material's behavior and film requirements.
What is the melting point of Indium(III) Sulfide (In2S3) evaporation material and how does it influence deposition source selection?
The melting point is 1,050°C with a density of 4.9 g/cm³. This supports thermal evaporation or low-power e-beam deposition by RFQ. Crucible and boat materials compatible with this melting point include quartz, alumina, graphite, Ta/W boat, or Knudsen cell, as specified in the product documentation.
Can Indium(III) Sulfide (In2S3) pieces be used with e-beam evaporation?
Yes, but only low-power e-beam evaporation by RFQ is recommended. Thermal evaporation is also supported. Suitable source hardware includes quartz, alumina, graphite crucible, Ta/W boat, or Knudsen cell, as indicated in the product specifications.
How does the cost per gram vary across available pack sizes for In2S3 evaporation material?
The indicative price per gram decreases with larger pack sizes: 25g at USD 200 (USD 8/g), 100g at USD 340 (USD 3.40/g), 500g at USD 800 (USD 1.60/g), and 1kg at USD 850 (USD 0.85/g). The minimum order quantity is 25g, and buyers should confirm deposition source geometry and quantity requirements before quotation.
This Indium(III) Sulfide (In2S3) evaporation material, supplied as 99.99% pure pieces sized 1–3 mm, is designed for thermal evaporation or low-power e-beam deposition in research settings. The high melting point of 1,050°C and density of 4.9 g/cm³ require careful selection of crucible/boat materials and hardware compatibility verification before purchase.
Positive
- High-purity (99.99%) In2S3 source: The 99.99% purity specification enables controlled deposition of indium sulfide films with minimal impurity introduction, suitable for research-grade thin-film applications.
- Consistent piece size 1–3 mm: The specified piece size range facilitates uniform loading into evaporation sources, promoting reproducible evaporation rates and film thickness across batches.
Trade-offs
- High melting point requires specialized hardware: With a melting point of 1,050°C, this material demands robust evaporation sources such as quartz/alumina/graphite crucibles or Ta/W boats, and may not be suitable for standard low-temperature setups without prior compatibility verification.
- Pre-quotation compatibility verification required: Buyers must confirm deposition-source compatibility, including crucible material and boat type, before ordering to avoid process mismatch. The product description explicitly requires a procurement check for model, purity, form, size, and source compatibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
