|
Indium (II)Sulfide (InS) Evaporation Material, Pellets, 99.99%, 76 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Indium (II) Sulfide pellets require careful selection of crucible material and evaporation method to avoid contamination and achieve desired film properties. The material's melting point and density must be considered when configuring deposition parameters.
- Crucible and Boat Compatibility: Compatible evaporation sources include quartz, alumina, or graphite crucibles, tantalum or tungsten boats, and Knudsen cells, depending on the process route.
- Evaporation Method Suitability: The material is suitable for thermal evaporation or low-power electron beam evaporation, requiring matching of source hardware to the material's melting point of 692°C.
How does the 76 mm pellet size of Indium(II) sulfide (InS) evaporation material affect compatibility with common thermal evaporation boats and crucibles?
The 76 mm pellets are designed for thermal evaporation and low-power e-beam deposition. Compatible evaporation sources include quartz, alumina, or graphite crucibles, tantalum/tungsten boats, or Knudsen cells (by RFQ). The large pellet size supports consistent source loading, but buyers should confirm deposition source geometry and loading capacity before ordering.
What are the considerations for using Indium(II) sulfide (InS) pellets in low-power e-beam evaporation versus thermal evaporation?
The product is primarily suited for thermal evaporation using quartz, alumina, or graphite crucibles, or Ta/W boats. Low-power e-beam evaporation is available by RFQ due to the material's specific electrical and thermal properties. The melting point of 692 and density of 5.18 g/cm³ should be matched to the e-beam source parameters to avoid material decomposition or non-uniform deposition.
What documentation and safety considerations are required when procuring Indium(II) sulfide (InS) evaporation material for laboratory use?
Buyers should review the certificate of analysis and safety data sheet (SDS) for the specific pack size. The product is research-grade with 99.99% purity, and shipment conditions must be confirmed to maintain material integrity. Export requirements may apply. Inquiries for documentation and technical support can be directed to Atomfair's technical sales team.
Indium (II) Sulfide (InS) evaporation material supplied as 99.99% pure 76 mm pellets for thermal or low-power e-beam deposition. The product requires RFQ-based source matching and process optimization, but offers defined purity and scalable pack sizes for R&D to pilot production.
Positive
- High-purity 99.99% InS pellets: Specified 99.99% purity and defined material identity (InS) enable reproducible thin-film stoichiometry and direct comparison with standard-grade or RFQ-controlled alternatives.
- Flexible pack sizes 25g–1kg: Available in 25g, 100g, 500g, and 1kg packs, allowing laboratory-scale optimization to pilot-scale production without reordering a different form factor.
Trade-offs
- Deposition source compatibility requires RFQ: Evaporation source hardware (crucible, boat, or Knudsen cell) and method (thermal or low-power e-beam) are not pre-configured; buyers must submit an RFQ for compatibility confirmation before ordering.
- Process optimization needed for sulfide films: The melting point (692°C) and density (5.18 g/cm³) require careful matching of evaporation parameters to material behavior and film requirements, as noted in the procurement checklist.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
