|
Indium (III)Oxide (In2O3) Evaporation Material, Powder, 99.99%, 18-68 nm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires selection of compatible evaporation hearth liners or boats to avoid contamination during deposition. The powder form and nanometer particle size impose loading constraints and may affect evaporation rate consistency.
- Evaporation Source Compatibility: This material is compatible with E-beam hearths using graphite, alumina, or boron nitride liners, or boats made of tungsten, molybdenum, or tantalum for thermal evaporation by request.
- Process Route Matching: The evaporation method must be matched to the material's melting point of 850 degrees Celsius and a Z-ratio of 1.00, with E-beam evaporation preferred for optimal performance.
- Particle Size Handling: The 18-68 nanometer particle size requires careful powder loading to ensure uniform evaporation and avoid source spitting or incomplete melting.
- Purity Verification: The 99.99 percent purity specification must be verified for compatibility with ultra-high vacuum deposition environments and film purity requirements.
- Infrastructure Requirements: Deposition must be performed in a vacuum chamber with appropriate pump-down capability and temperature control to achieve consistent thin-film growth.
Is Indium (III) Oxide (In2O3) powder with 18-68 nm particle size suitable for thermal evaporation, or is e-beam evaporation required?
E-beam evaporation is the preferred method for this In2O3 powder (99.99% purity, 18-68 nm). Thermal evaporation is available by RFQ (request for quotation). The product's E-beam performance is rated as 'Good' when using an E-beam hearth with graphite/Al2O3/BN liner or W/Mo/Ta boat. For thermal evaporation, consult Atomfair technical sales for compatibility assessment.
What deposition source hardware is compatible with Atomfair In2O3 powder evaporation material?
The In2O3 powder (99.99%, 18-68 nm) is compatible with E-beam hearths using graphite, Al2O3, or BN liners, or W/Mo/Ta boats. The product also supports W, Pt, and Al2O3 hardware configurations. It is critical to confirm deposition-source geometry and hardware compatibility before ordering, as indicated in the procurement checklist.
What is the significance of 99.99% purity for Indium (III) Oxide evaporation material?
The 99.99% purity specification (4N) indicates high-purity grade suitable for research-grade thin-film deposition where contamination must be minimized. This purity level, combined with the 18-68 nm particle size, supports consistent evaporation behavior and film quality. For applications requiring higher purity, RFQ-controlled grades may be available.
Indium (III) Oxide (In2O3) evaporation material, powder, 99.99% purity, 18-68 nm particle size, optimized for E-beam evaporation with Good performance using graphite/Al2O3/BN liner or W/Mo/Ta boat; thermal evaporation available by RFQ only.
Positive
- High purity and defined particle size: 99.99% purity and 18-68 nm particle size enable consistent stoichiometry and controlled evaporation behavior in vacuum deposition.
- Good E-beam evaporation performance: Rated Good for E-beam evaporation using graphite/Al2O3/BN liner or W/Mo/Ta boat, providing reliable process compatibility.
Trade-offs
- Thermal evaporation requires RFQ: Thermal evaporation is not standard and must be requested via RFQ, which may delay procurement and require additional process validation.
- Specific crucible/boat materials required: E-beam deposition requires graphite/Al2O3/BN liner or W/Mo/Ta boat; incorrect hardware may cause contamination or poor film quality.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
