|
Gallium Phosphide (GaP) Evaporation Material, Pieces, 99.9%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires thermal evaporation or e-beam after decomposition review, using quartz, alumina, or graphite crucibles. The 1-3 mm piece size facilitates controlled loading, but the high melting point of 1540°C demands careful source temperature management.
- Evaporation Method Constraint: Thermal evaporation is the recommended method; e-beam evaporation requires prior decomposition review to prevent material degradation.
- Crucible Material Compatibility: Use quartz, alumina, or graphite crucibles, or a sealed-source setup, to avoid chemical reaction or contamination.
- Source Geometry Matching: Confirm deposition source geometry and crucible dimensions to accommodate the 1-3 mm piece size without bridging.
Can gallium phosphide (GaP) evaporation pieces be deposited by e-beam without additional precautions?
No, e-beam evaporation of GaP is only permitted after a decomposition review, as stated in the product specifications. Thermal evaporation is available by RFQ using quartz, alumina, or graphite crucibles, or a sealed-source setup. The decomposition review is required to prevent material degradation under e-beam conditions.
Which crucible materials are compatible with thermal evaporation of GaP pieces?
The product specifies that quartz, alumina, or graphite crucibles, as well as a sealed-source setup, are compatible for thermal evaporation by RFQ. For e-beam, a decomposition review is required before selecting crucible hardware. These options ensure appropriate thermal management for GaP's melting point of 1,540°C.
Why is the 1–3 mm piece size specified for GaP evaporation material, and what procurement factors should be verified?
The 1–3 mm piece size is specified to support source loading and evaporation review for vacuum thin-film deposition. Buyers must confirm deposition source geometry, quantity, certificate requirements, and shipment conditions before quotation. This ensures compatibility with the crucible and evaporation method.
Gallium Phosphide (GaP) evaporation material supplied as 99.9% purity pieces (1–3 mm) for thin-film deposition. The material requires careful source matching: thermal evaporation by RFQ is recommended, while e-beam use is permitted only after decomposition review. Crucible options include quartz, alumina, graphite, or sealed-source configurations, with tungsten, tantalum, or quartz hardware compatibility noted.
Positive
- Defined material identity and purity: Gallium Phosphide (GaP) with 99.9% purity enables clear procurement matching for deposition processes requiring standard-grade compound evaporation material.
- Specified physical form and size range: Supplied as pieces in 1–3 mm size range, facilitating consistent source loading and evaporation behavior in crucible-based systems.
Trade-offs
- Evaporation method constraints: Thermal evaporation requires RFQ confirmation; e-beam use is allowed only after decomposition review, adding process validation steps before deployment.
- Crucible and hardware compatibility required: Deposition source hardware (quartz/alumina/graphite crucible or sealed-source) and boat materials (W, Ta, Q) must be matched to the material's melting point (1540 °C) and decomposition behavior, necessitating pre-quotation technical review.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
