|
Boron Sulfide (B2S3) Evaporation Material, Pieces, 99.99%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires careful selection of deposition source hardware and process parameters to achieve consistent film quality. The material's melting point and particle size influence source loading and evaporation rate control.
- Crucible Compatibility: Use quartz, alumina, or graphite crucibles, or tantalum/tungsten boats, or Knudsen cells to avoid chemical reaction or contamination.
- Evaporation Method: Thermal evaporation or low-power electron-beam methods are suitable for this material.
- Melting Point Constraint: Ensure the deposition source can achieve and maintain a temperature of 310°C for controlled evaporation.
- Particle Size Handling: The 1-3 mm piece size requires uniform loading to prevent source spitting or uneven evaporation.
- Purity Management: Maintain clean handling procedures to preserve the 99.99% purity and avoid film contamination.
What is the melting point and density of Boron Sulfide (B2S3) evaporation material, and how do they influence deposition method selection?
The melting point is 310°C and the density is 1.55 g/cm³ as stated in the technical specifications. These values indicate that thermal evaporation is the primary recommended method, while low-power e-beam evaporation is available only by RFQ to confirm compatibility with the material's low melting point and density.
Which crucible or boat materials are compatible with B2S3 evaporation, and does the product support both thermal and e-beam deposition?
The product is compatible with quartz, alumina, or graphite crucibles, as well as Ta/W boats or Knudsen cells, all by RFQ. It supports thermal evaporation and low-power e-beam by RFQ, but the specific deposition-source hardware must be confirmed before quotation to ensure proper material handling and film quality.
What procurement and handling steps should be taken before ordering Boron Sulfide evaporation material to avoid compatibility issues?
Buyers must confirm deposition source geometry, required quantity, certificate requirements, and shipment conditions before quotation. The material is supplied as 1-3 mm pieces in pack sizes of 25g, 100g, 500g, or 1kg, and it is critical to review the melting point (310°C) and density (1.55 g/cm³) against the evaporation hardware and process route to ensure proper deposition.
Boron Sulfide (B2S3) evaporation material supplied as 99.99% pure 1–3 mm pieces, suitable for thermal or low-power e-beam deposition using quartz, alumina, graphite crucibles, or Ta/W boats. The low melting point (310°C) and low density (1.55 g/cm³) require careful process matching and temperature control.
Positive
- High purity 99.99% specification: The 99.99% purity ensures minimal contamination and consistent film stoichiometry in vacuum thin-film deposition, enabling reliable comparison with standard and high-purity grades.
- Multiple pack sizes available: Available in 25g, 100g, 500g, and 1kg packs, allowing flexible scaling from small R&D batches to larger production runs without reordering.
Trade-offs
- Requires deposition-source compatibility check: The evaporation source hardware (e.g., crucible, boat, Knudsen cell) and process route must be matched to the material's melting point and film requirements; buyers must confirm compatibility before ordering.
- Low melting point limits process window: With a melting point of 310°C, the material may require precise temperature control to avoid premature evaporation, decomposition, or non-uniform film growth during thermal or low-power e-beam deposition.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
