|
Zirconium (Zr) Evaporation Material, Pieces, 99.99%, 3-6 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires e-beam deposition with water-cooled copper hearth or compatible liners. Procurement must verify material specifications and documentation before use.
- Deposition Source Compatibility: Use water-cooled copper e-beam hearth or graphite/Al2O3/BN/Ta liner as compatible source.
- Process Parameter Constraints: Account for melting point of 1852°C, density of 6.49 g/cm³, and Z-ratio of 0.6 when setting deposition parameters.
- Physical Form Requirement: Load pieces of 3-6 mm size into the evaporation source for proper material feeding.
- Procurement Verification: Confirm model, purity, form, size range, pack size, and deposition-source compatibility before quoting.
- Documentation Review: Review certificate of analysis, safety data sheet, shipment conditions, and export requirements for laboratory use.
What is the significance of the Z-ratio of 0.6 for zirconium evaporation material in e-beam deposition?
The Z-ratio of 0.6 is a material-specific constant used in quartz crystal microbalance (QCM) monitoring to accurately control e-beam evaporation rate and film thickness. For zirconium, this value is provided in the product specifications and must be programmed into the deposition controller to achieve the correct deposition rate. The density of 6.49 g/cm³ and melting point of 1,852°C further influence process parameters.
What are the compatible liner materials for e-beam evaporation of zirconium pieces?
The product is designed for use with a water-cooled copper e-beam hearth, with compatible liner materials including graphite, Al2O3, BN, and Ta. These liners are selected based on the high melting point of zirconium (1,852°C) and the need to avoid contamination. Buyers should confirm that their deposition source geometry matches the 3–6 mm piece size range.
What documentation and safety review steps are recommended before purchasing zirconium evaporation material?
Prior to purchase, buyers should review the certificate of analysis, safety data sheet, shipment conditions, and any export requirements. The product description explicitly advises confirming these items against laboratory use requirements. Additionally, the material is supplied as pieces with a specified purity of 99.99% and pack sizes of 100g, 500g, or 1kg, which should be matched to the intended deposition run.
This zirconium evaporation material provides 99.99% purity in 3–6 mm pieces suitable for e-beam evaporation, but requires careful matching of deposition source hardware and confirmation of certificate and shipment conditions before quotation.
Positive
- High purity 99.99% zirconium: The 99.99% purity specification ensures minimal contamination for sensitive thin-film deposition applications in research and laboratory settings.
- Optimized physical form for e-beam: Supplied as 3–6 mm pieces, this form factor is directly compatible with standard e-beam evaporation source loading, promoting consistent deposition rates.
Trade-offs
- Requires source hardware matching: Optimal performance requires a water-cooled copper e-beam hearth with compatible liners (graphite, Al2O3, BN, Ta); mismatched hardware may affect evaporation behavior.
- Pre-quotation confirmation needed: Buyers must confirm deposition source geometry, certificate requirements, and shipment conditions before quotation, adding a pre-purchase validation step.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
