Description
3.20V 50Ah LFP Prismatic Cell | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||
|
Manufacturer: ATOMFAIR LLC
Brand: ATOMFAIR®
|
This lithium iron phosphate (LFP) prismatic cell is designed for integration into energy storage systems with appropriate battery management. The cell requires electrical isolation to prevent short circuits and must be handled with insulated tools.
- Battery Management System Integration: Integrate the cell with a BMS that monitors voltage, current, and temperature to prevent overcharge or overdischarge.
- Electrical Isolation: Maintain electrical isolation between terminals to avoid short circuits and use insulated tools during handling.
- Temperature Control: Operate the cell within the rated temperature range for optimal performance and safety.
Before first use, verify the cell's voltage and physical integrity. Install the cell in a clean, dry environment with proper ventilation.
Required Equipment: Insulated gloves, Digital multimeter, Non-conductive mounting brackets
- Inspect cell
Inspect the cell for any physical damage or deformation before handling. - Verify voltage
Verify the cell's voltage is within the acceptable range for the system using a digital multimeter. - Connect to BMS
Connect the cell to the battery management system following the manufacturer's wiring diagram. - Position cell
Place the cell in the designated battery compartment ensuring proper orientation and spacing. - Secure cell
Secure the cell using non-conductive mounting brackets to prevent movement during operation. - Connect load
Connect the load or charger after confirming all electrical connections are tight and correctly polarized. - Monitor initial cycle
Monitor the cell during the initial charge cycle for any abnormal temperature rise or voltage deviation.
How does the 1C continuous charge/discharge rate of this 50Ah LFP prismatic cell affect its suitability for high-power ESS applications compared to cells with higher C-rate capability?
The 1C maximum continuous charge and discharge rate limits this cell to a sustained power output of 160W per cell, making it optimized for energy capacity and cycle life rather than high-power bursts. With a cycle life of ≥4000 cycles at 1C/1C, 100% DOD with 80% capacity retention, it is ideal for daily deep cycling in residential and commercial ESS, but not for applications requiring rapid charge or discharge above 50A.
Can this 3.20V 50Ah LFP prismatic cell be integrated into an existing 48V battery bank without requiring a custom BMS configuration?
Integration into a 48V bank requires a dedicated BMS with over-discharge, over-charge, short-circuit, and cell balancing protection, as specified in the product notice. The cell's nominal voltage of 3.20V means a 15S configuration yields 48.0V nominal, but the BMS must be configured for LFP chemistry's voltage window and the cell's 1C rate limits to ensure safe operation and optimal cycle life.
What are the specific storage and handling requirements for this aluminum-case LFP prismatic cell to prevent damage before installation?
Cells are shipped in humidity-controlled vacuum sealed packaging with individual isolation in anti-static foam lined cartons to prevent moisture ingress and mechanical damage. The product notice mandates storage and operation within the appropriate temperature range, avoidance of mechanical deformation or short circuits, and pre-conditioning at a suitable temperature before first use to maintain the ≥4000 cycle life specification.
The ATOMFAIR 3.20V 50Ah LFP Prismatic Cell delivers ≥4000 cycles at 100% DOD with 80% capacity retention and a safe LFP chemistry, ideal for stationary energy storage, though it is limited to a 1C continuous charge/discharge rate and requires an external BMS for safe operation.
Positive
- Ultra-Long Cycle Life for Deep Cycling: Delivers ≥4000 cycles at 1C/1C, 100% DOD with 80% capacity retention, ideal for daily deep cycling in energy storage systems.
- Intrinsic Thermal and Chemical Stability: LFP chemistry provides excellent thermal and chemical stability, significantly reducing the risk of thermal runaway and enhancing operational safety.
Trade-offs
- Limited Continuous Charge/Discharge Rate: Maximum continuous charge and discharge rate is 1C, which may restrict use in applications requiring higher power delivery or faster charging.
- Requires External BMS Protection: A dedicated BMS with over-discharge, over-charge, short-circuit, and cell balancing protection is mandatory, adding system complexity and cost.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
