ATOMFAIR 304/316L STAINLESS STEEL CONDUCTIVE SPACERS 15.8×0.5MMRESEARCH GRADE MATERIAL
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Important Note: Default accompanying accessories are made of 304 stainless steel. For accessories made of other materials, please email for customization.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This spacer is validated for CR20 series coin cells under specific electrochemical conditions. Material selection must match the electrolyte and voltage window to avoid corrosion or side reactions.
- Voltage Window Constraint: Operate only between -0.5V and 5.0V to maintain electrochemical inertness and prevent side reactions.
- Material Selection Guideline: Choose 304 for routine or aqueous systems; select 316L for sulfide, chloride, or high-voltage environments.
- Dimensional Tolerance Requirement: Maintain ±0.02mm dimensional tolerance to ensure uniform current distribution and consistent stack pressure.
- Cleanliness and Inspection: Verify the spacer is oil-free, burr-free, and impurity-free before introducing it into the glovebox assembly area.
Proper spacer selection and placement ensure consistent pressure and current distribution in coin cell batteries. Follow these steps to integrate the spacer into a CR2032 assembly.
Required Equipment: Inert atmosphere glovebox
- Select Material Grade
Select the appropriate stainless steel grade (304 or 316L) based on electrolyte corrosivity and operating voltage. - Inspect Spacer
Inspect the spacer for visual defects, burrs, or contamination before use. - Transfer to Glovebox
Transfer the spacer into an inert atmosphere glovebox for battery assembly. - Position in Cell Case
Position the spacer centrally within the CR2032 cell case to ensure uniform current distribution.
What are the key performance trade-offs between 304 and 316L stainless steel conductive spacers for battery research?
The 304 stainless steel spacer offers general corrosion resistance and is suitable for most routine testing, aqueous batteries, and low-to-medium voltage systems. The 316L stainless steel variant provides superior resistance to sulfide and chloride ion corrosion along with higher temperature tolerance, making it optimal for sulfide solid-state batteries, high-voltage batteries, highly corrosive systems, and long-term cycling tests. Both maintain dimensional tolerance of ±0.02 mm and comply with ASTM A240.
Are the ATOMFAIR 304/316L stainless steel conductive spacers compatible with CR2025 and CR2016 coin cell models?
Yes, the spacers are specified as compatible with all CR20 series internal dimensions, including CR2025 and CR2016. The default dimensions of 15.8 mm diameter and 0.5 mm thickness match the internal geometry of these coin cell cases. For other sizes or models, customization is available upon request.
Can the ATOMFAIR stainless steel conductive spacers be used directly inside a glovebox without additional preparation?
Yes, the spacers undergo 100% dimensional inspection, flatness verification, surface quality inspection, and appearance inspection to ensure they are oil-free, burr-free, and impurity-free. They are designed to be used directly for battery assembly inside gloveboxes without any additional cleaning or preparation.
These 15.8×0.5 mm conductive spacers in 304 or 316L stainless steel provide precise dimensional control and material-specific corrosion resistance for coin cell assembly, but are only stocked in a single size and sold in packs of 1000, limiting flexibility for small-scale users.
Positive
- High-precision dimensional tolerance: All spacers are manufactured with a dimensional tolerance of ±0.02 mm, ensuring consistent fit and uniform current distribution across multiple cell assemblies.
- Corrosion-resistant material options: Offered in 304 and 316L stainless steel, with 316L providing enhanced resistance to sulfide and chloride ion corrosion, suitable for high-voltage and sulfide solid-state battery systems.
Trade-offs
- Limited standard size availability: The spacers are only available in a single default size of 15.8×0.5 mm; any other thickness or diameter requires custom ordering via email, which may increase lead time.
- Large minimum pack quantity: Each pack contains 1000 pieces, which may exceed the needs of small-scale or exploratory research groups and necessitate larger inventory storage.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
