72V Step-Through Motive Battery Pack Series (20S1P Pouch Cell Horizontal Grade) | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||
This battery pack requires systematic BMS balancing to prevent premature degradation and must be charged only under authorized safety parameters. Terminal connections must not exceed designated load limits, and swapping lock alignment must be verified before locking.
- Intelligent BMS Balancing Requirement: The battery pack requires systematic intelligent battery management balancing actions to block premature layer degradation loops.
- Terminal Load Limits: Prevent terminal contacts from being connected beyond designated load limits.
- Authorized Charging Only: Execute charging loops exclusively under authorized safety parameters.
- Lock Alignment Verification: Ensure swapping lock alignment tolerances line up properly before locking structural handles into automated cabinet footprints.
Follow these steps to ensure safe installation, charging, and swapping of the battery pack. Proper alignment and BMS initialization are critical to prevent damage and ensure longevity.
Required Equipment: BMS Controller, Authorized Charger, Swapping Cabinet Locking Mechanism
- Align battery pack
Ensure swapping lock alignment tolerances line up properly before locking structural handles into automated cabinet footprints. - Check terminal connections
Verify that terminal contacts are not connected beyond designated load limits. - Charge using authorized equipment
Perform charging cycles only using authorized safety parameters and equipment.
What are the key differences between the 35Ah and 50Ah variants of the 72V step-through motive battery pack in terms of physical dimensions and operating temperature optimization?
The 35Ah variant measures 345×226×175 mm and is optimized for sub-zero operation, while the 50Ah variant measures 350×216×175 mm and offers higher energy density for maximum range. Both share the same 20S1P topology and 72V nominal voltage.
Which communication protocols does the 72V step-through battery pack integrate with for vehicle dashboard and battery swapping network connectivity?
The battery pack features native support for Bluetooth, a One-line Dashboard Bus, RS485, and Controller Area Network (CAN) multi-protocol node, enabling real-time telemetry tracking and seamless integration with smart battery swapping networks.
What are the required maintenance and safety precautions for the 72V step-through battery pack's BMS during charging and swapping operations?
The BMS requires systematic intelligent balancing actions to prevent premature layer degradation. Charging must be performed only under authorized safety parameters, and swapping lock alignment tolerances must be properly aligned before securing handles into automated cabinet footprints.
The 72V Step-Through Motive Battery Pack Series (20S1P pouch cell horizontal grade) is evaluated as a high-energy-density lithium-ion pack optimized for under-floorboard integration in e-mobility chassis, offering 2520 Wh or 3600 Wh typical energy output with IPX7 environmental sealing and multi-protocol telemetry for fleet management.
Positive
- High cycle durability for fleet use: Rated for over 2500 deep discharge cycles to ≥70% capacity, reducing long-term total cost of ownership for urban delivery fleets.
- IPX7 environmental protection: Hermetic shell sealing provides safety against flood immersion, heavy rain, and high-humidity swap cabinets, enabling all-weather operation.
Trade-offs
- Requires systematic BMS balancing: The high-capacity 72V internal battery string requires intelligent battery management balancing to prevent premature layer degradation, adding operational complexity.
- Swapping lock alignment tolerance: Proper alignment of swapping lock tolerances is required before locking structural handles into automated cabinet footprints, necessitating precise mechanical fit during installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
