51.2V 50Ah CONDENSED CORE BATTERY – MINING/MARINE POWER SUPPLY | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This battery requires strict adherence to charge and discharge current limits to prevent thermal runaway or cell damage. The sealed IP67/IP68 enclosure must remain intact to maintain explosion-proof certification and environmental protection.
- Charge Rate Constraint: Maximum continuous charge current must not exceed 1C to avoid overcurrent stress on the internal cell matrix.
- Discharge Rate Constraint: Continuous discharge rate must be maintained within the 1C to 6C window to prevent voltage sag or thermal overload.
- Temperature Operating Envelope: Discharge operation is limited to -20°C to 65°C, and charging is restricted to -10°C to 45°C to preserve electrochemical stability.
- Explosion Protection Integrity: The Ex(ia)IIICT6Gb rating is contingent on the chassis remaining hermetically sealed and free from physical damage.
- Mechanical Stress Resistance: The battery is certified to IEC60068-2-6 for vibration, moisture, salt fog, and acid/alkali exposure, requiring secure anchoring in high-vibration environments.
This procedure outlines the critical steps for initial deployment, electrical connection, and operational monitoring of the mining/marine power supply battery. Adherence to these steps ensures safe operation within the specified voltage, current, and environmental limits.
Required Equipment: Insulated torque wrench, Digital multimeter with voltage and current measurement, Personal protective equipment (insulated gloves, safety goggles)
- Inspect the battery chassis
Inspect the sealed IP67/IP68 enclosure for any cracks, dents, or compromised gaskets before handling. - Secure the battery in its mounting location
Anchor the battery case to a structural table or mounting bracket using corrosion-resistant fasteners to prevent sliding during operation. - Connect the load cables
Connect the positive and negative load cables using an insulated torque wrench, ensuring terminal bolts are tightened to the manufacturer's specified torque. - Verify voltage polarity and charge state
Verify the open-circuit voltage is within the 40.0 V to 58.4 V range using a digital multimeter before initiating any charge or discharge cycle. - Set the charge current limit
Set the charging source to deliver a continuous current not exceeding 1C (50 A) and confirm the charge cut-off voltage is configured to 58.4 V. - Monitor discharge rate during operation
Monitor the discharge current continuously to ensure it remains within the 1C to 6C continuous window and does not exceed 6C under any transient load. - Confirm ambient temperature compliance
Confirm the ambient temperature during charging stays between -10°C and 45°C and during discharging between -20°C and 65°C throughout the duty cycle.
What is the maximum continuous discharge rate of the 51.2V 50Ah mining marine battery and how does it affect motor surge handling?
The battery supports a continuous high-rate discharge window of 1C to 6C, enabling up to 300A (6C × 50Ah) output. This allows handling instant motor surges without transient voltage drops, as specified in the heavy high-rate output profile.
What are the charge and discharge voltage cut-off limits for the Atomfair condensed core battery and how do they integrate with standard 48V systems?
The charge cut-off voltage is 58.4V, and the discharge voltage range is 40.0V to 58.4V. These limits align with typical 48V nominal systems, but the BMS must be configured to respect these thresholds to prevent overcharge or deep discharge.
What explosion protection and ingress ratings does the 51.2V 50Ah battery have for use in mining or marine environments?
The battery is certified Ex(ia)IIICT6Gb for intrinsic explosion safety in volatile atmospheres, with an IP67/IP68 hermetic seal against dust and deep water submersion. It also uses UL94 V-0 flame retardant composites and meets IEC60068-2-6 vibration, moisture, salt fog, and acid/alkali resistance standards.
This 51.2V 50Ah condensed core battery delivers intrinsic explosion-proof safety (Ex(ia)IIICT6Gb) and IP67/IP68 sealing for mining and marine environments, supporting up to 6C continuous discharge for high-power surges, but charging is capped at 1C and the operating temperature range is restricted to -20°C to 65°C for discharge and -10°C to 45°C for charging.
Positive
- Explosion-proof and hermetic sealing: Ex(ia)IIICT6Gb intrinsic safety rating combined with IP67/IP68 ingress protection allows deployment in volatile mining shafts and submerged or salt-spray marine environments.
- High 6C continuous discharge rate: Supports up to 6C continuous output, enabling high inrush current for motor surges in heavy mining machinery and marine propulsion without transient voltage drops.
Trade-offs
- Constrained charge rate ceiling: Maximum continuous charge current is limited to 1C, which may extend recharge times for high-capacity applications compared to faster-charging alternatives.
- Limited operating temperature range: Charging is restricted to -10°C to 45°C and discharging to -20°C to 65°C, imposing thermal management requirements in extreme cold or hot environments.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
