MixCore S Adjustable Vortex MixerProduct Type: Vortex Mixer
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
Operate within 5–40°C ambient temperature and ≤80% relative humidity to maintain safe electrical and mechanical function. Use only the specified voltage (100–120 V or 200–240 V, 50/60 Hz) and avoid wet environments due to IP21 protection class.
- Temperature Range: Operate only within 5–40°C to prevent motor overheating or component degradation.
- Humidity Limit: Maintain relative humidity ≤80% to avoid electrical short circuits or corrosion.
- Voltage Compatibility: Connect to a power supply matching the unit's voltage rating to prevent damage to internal electronics.
- IP Rating: Avoid exposure to dripping water or ingress of solid objects larger than 12 mm due to IP21 protection rating.
Inspect the mixer and power cord for damage before each use. Select the appropriate head or adapter, set the speed via the scale, and engage the desired operating mode.
Required Equipment: VT1.1 standard head (included) for tubes and vessels under 30 mm diameter, Compatible adapter or platform for larger vessels (sold separately)
- Inspect the unit
Inspect the power cord, plug, and housing for visible damage before connecting to the mains supply. - Attach the head or adapter
Attach the VT1.1 standard head for tubes under 30 mm diameter or a compatible adapter for larger vessels. - Set the speed
Set the desired speed using the scale display, starting from a low rpm to avoid sample spillage. - Engage the operating mode
Press the tube or vessel onto the head to activate touch mode, or switch to continuous mode for extended operation. - Verify operation
Verify that the mixer reaches the set speed without excessive vibration or unusual noise before proceeding. - Shut down after use
Turn off the unit and unplug it from the power source after each use to prevent accidental start-up.
What speed range, orbit, and operating modes does the MixCore S Adjustable Vortex Mixer support?
The MixCore S provides an adjustable speed range of 0–3000 rpm with a 4 mm circular orbit. It supports both touch mode and continuous mode, and uses a shaded-pole motor rated at 58 W input power and 10 W output power. This combination is intended for repeatable mixing or shaking of tubes and small vessels, but final compatibility should be confirmed with the selected head or platform.
Which tube or vessel sizes are compatible with the MixCore S standard head?
The included standard head, model VT1.1 with reference code 18900034, is designed for tubes and small vessels below 30 mm in diameter. Vessels larger than 30 mm or other platform formats require accessory and platform compatibility confirmation before purchase. The 4 mm orbit and 0–3000 rpm speed range should also be considered when evaluating mixing performance for a specific vessel type.
What electrical and environmental installation conditions apply to the MixCore S Adjustable Vortex Mixer?
The mixer is rated for 100–120 V / 200–240 V, 50/60 Hz supply with a 60 W power draw. Permissible ambient temperature is 5–40 °C, permissible relative humidity is up to 80% RH, and the enclosure is rated IP21. Confirm that the laboratory supply voltage and installation environment match these limits before operation.
The MixCore S Adjustable Vortex Mixer is a research-grade unit with a 0–3000 rpm speed range and 4 mm orbit diameter, offering both touch and continuous modes. Its shaded-pole motor delivers 10 W output power with a 60 W input, suitable for controlled mixing of tubes and small vessels under 30 mm diameter.
Positive
- Dual operating mode flexibility: Touch mode and continuous mode enable both intermittent and extended mixing workflows without requiring external timers for mode switching.
- Broad speed range with circular motion: Speed range from 0 to 3000 rpm with a 4 mm orbit diameter allows fine-tuned control for mixing, shaking, or vortexing a variety of sample types.
Trade-offs
- Limited to small vessels: Standard head VT1.1 is designed for tubes and vessels below 30 mm diameter, restricting applications to small-volume samples without additional adapters.
- Ambient and humidity constraints: Permissible ambient temperature range of 5–40°C and 80% RH limit operation in non-climate-controlled or high-humidity environments, and IP21 rating provides minimal protection against liquid ingress.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
