ShakeCore D 1810 S 3D ShakerProduct Type: 3D Shaker
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
The ShakeCore D 1810 S 3D Shaker must be operated within 5-40°C and 80% relative humidity. The maximum load is 2 kg, and the device has IP21 protection class, requiring a dry environment.
- Environmental limits: Ambient temperature and humidity must remain between 5-40°C and 80% RH to prevent motor or electronic degradation.
- Load capacity: Total sample and platform weight must not exceed 2 kg to maintain stable 10° tilt angle and avoid mechanical overload.
- Electrical supply: Connect only to a 100-240 V, 50/60 Hz grounded outlet to ensure safe operation and prevent electrical damage.
- Mechanical stability: Place the shaker on a stable, level surface to preserve the 10° tilt angle and prevent unintended movement during operation.
- Protection class: IP21 rating limits ingress protection to solid objects above 12.5 mm and dripping water, so avoid liquid spills and dust accumulation.
This procedure describes how to set up and run the ShakeCore D 1810 S 3D Shaker for controlled mixing. Ensure the shaker is placed on a stable surface and connected to the correct power supply before starting.
Required Equipment: ShakeCore D 1810 S 3D Shaker
- Set timer
Set the timer to the desired duration between 1 minute and 99 hours 59 minutes using the LED timer display. - Set speed
Set the speed between 10 and 80 rpm using the LED speed display. - Load samples
Place the sample vessel onto the platform, ensuring the total load does not exceed 2 kg. - Start operation
Activate the shaker by engaging the motor control to begin the programmed shaking cycle.
What is the timer setting range of the ShakeCore D 1810 S 3D Shaker and can it be used for both short and long duration mixing?
The ShakeCore D 1810 S offers a timer setting range from 1 minute to 99 hours 59 minutes, accommodating both short mixing cycles and extended overnight or multi-day protocols. The LED timer display provides clear readout, and the DC motor (16 W input, 10 W output) maintains consistent performance across the full speed range of 10–80 rpm.
What are the permissible ambient temperature and humidity conditions for operating the ShakeCore D 1810 S?
The ShakeCore D 1810 S is designed for operation in ambient temperatures of 5–40 °C and relative humidity up to 80% (non-condensing). These conditions ensure reliable motor and electronic performance; use outside this range may affect speed stability and timer accuracy.
What is the IP protection rating of the ShakeCore D 1810 S and what does it indicate about spill resistance?
The ShakeCore D 1810 S carries an IP21 protection rating, meaning it is resistant to solid objects larger than 12.5 mm (e.g., fingers) and to vertically dripping water. While it can tolerate minor splashes, it is not waterproof; avoid liquid spills on the housing and do not submerge or use in high-humidity condensing environments.
The ShakeCore D 1810 S is a compact 3D shaker with a fixed 10-degree tilt angle and a speed range of 10–80 rpm, supporting loads up to 2 kg for controlled mixing, shaking, and rocking workflows in laboratory settings.
Positive
- Broad timer setting range: The timer can be set from 1 minute to 99 hours 59 minutes, enabling both short mixing cycles and extended overnight shaking protocols without external timing equipment.
- Wide voltage compatibility: Operates over 100–240 V, 50/60 Hz, allowing direct integration into laboratories with varied electrical infrastructure without need for a voltage converter.
Trade-offs
- Limited maximum load capacity: With a maximum load of 2 kg, the shaker is restricted to light sample vessels and small batches, making it unsuitable for heavy or large-volume shaking applications.
- Fixed tilt angle for 3D motion: The 10-degree tilt angle is not adjustable, which limits the range of mixing dynamics compared to shakers with variable tilt, potentially constraining optimization for specific sample types.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
