GOLD NANORODS 30NM 99% RESEARCH GRADE NANOROD MATERIALRESEARCH GRADE MATERIAL
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Brand: ATOMFAIR®
The product must be stored at 2-8°C in a light-protected, sealed container to maintain stability. Handling requires appropriate personal protective equipment and consultation of the SDS prior to use.
- Storage Temperature: Maintain storage temperature between 2 and 8 degrees Celsius.
- Light Protection: Protect the dispersion from light exposure to prevent degradation.
- Sealed Container: Keep the container tightly sealed to avoid evaporation or contamination.
- Personal Protective Equipment: Wear appropriate PPE such as gloves and safety glasses when handling.
- SDS Review: Review the Safety Data Sheet before initiating any work with the material.
This procedure outlines the initial storage and safety measures for the gold nanorod dispersion. Follow these steps to ensure proper preservation and handling of the material.
- Inspect package
Inspect the sealed container for damage and verify integrity upon receipt. - Store in refrigerator
Place the product in a refrigerator set at 2-8°C and shield it from light. - Wear PPE
Put on appropriate personal protective equipment before handling the material. - Consult SDS
Consult the Safety Data Sheet for safety information prior to use.
What is the dispersion medium and stabilizer concentration for the 30 nm gold nanorods, and how does it affect experimental reproducibility?
The gold nanorods are dispersed in ultrapure water at a concentration of 0.1 mg/mL with a stabilizer. This standardized dispersion medium minimizes batch-to-batch variability in surface chemistry, which is critical for reproducible SERS, photothermal, and catalytic assays. The low concentration also reduces aggregation risk during storage and handling.
Can these 30 nm gold nanorods be directly integrated into conductive paste or electrode formulations without additional surface modification?
The product is supplied as a dispersion in ultrapure water with a stabilizer, which may interfere with solvent compatibility or binder systems in conductive paste and electrode formulations. Researchers should evaluate the stabilizer's impact on film formation and conductivity, and may need to perform ligand exchange or washing steps before integration. The source does not specify the stabilizer chemistry, so compatibility testing is recommended.
What are the required storage conditions for maintaining nanorod stability and preventing aggregation?
The product must be stored at 2–8 °C in light-protected, sealed refrigerated conditions. Exposure to light or temperatures outside this range can destabilize the dispersion, leading to aggregation and loss of the nanorod morphology essential for near-infrared optical and SERS performance. Always confirm handling conditions with the supplier before procurement.
The Atomfair AF-AUNR302A is a 99% purity, 30 nm gold nanorod dispersion in ultrapure water (0.1 mg/mL), supplied in sealed laboratory packaging for catalysis, SERS, conductive coating, and photothermal research. Storage requires 2–8°C, light-protected, and refrigerated conditions, with handling limited to laboratory-scale R&D use.
Positive
- High purity for sensitive workflows: 99% purity is explicitly recorded for impurity-sensitive R&D, supporting catalysis, SERS, and electrode formulation studies where trace contaminants can alter results.
- Nanorod morphology enables optical and catalytic applications: The 30 nm nanorod shape is specified for photothermal, near-infrared, SERS, and electrocatalysis research, providing aspect-ratio-dependent plasmonic properties useful for sensing and energy applications.
Trade-offs
- Strict cold-chain storage required: The dispersion must be stored at 2–8°C in light-protected, sealed packaging; deviations risk aggregation or degradation of the nanorod dispersion, requiring refrigerated logistics and lab infrastructure.
- Low concentration and research-grade handling: Supplied at 0.1 mg/mL in ultrapure water, the material is intended for laboratory-scale R&D only; users must handle with PPE and consult SDS, and the dilute form may require concentration steps for certain applications.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
