Gas Diffusion High-Pressure Flow Test Cell, Shared ChannelProduct Type: High-pressure electrochemical cell
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, technical compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC LLC
Brand: ATOMFAIR®
|
The cell is a high-pressure electrochemical device with strict pressure-flow interdependency and electrical grounding requirements. Mishandling may lead to pressure bursts or electrical hazards if limits are exceeded.
- Pressure-Flow Limit: Operate only within the specified pressure-flow envelope: 30 MPa maximum at 0.10-20.00 mL/min and 20 MPa maximum at 20.01-50.00 mL/min to avoid structural failure.
- Electrical Supply Requirement: Connect the cell to a grounded AC 220V, 50 Hz power outlet only; improper grounding or voltage deviation may cause electrical shock or equipment damage.
- Flow Rate Setting Precision: Set flow rate using the 0.01 mL/min step increment within the 0.01-50.00 mL/min range to maintain stable operation and prevent pressure transients.
How does the operating flow rate affect the maximum pressure rating of the Atomfair AF-HP-PFC1 high-pressure flow test cell?
The maximum operating pressure depends on the flow rate: at 0.10–20.00 mL/min the cell withstands 30 MPa, but at 20.01–50.00 mL/min the maximum pressure drops to 20 MPa. This trade-off is critical when designing experiments that require both high flow and high pressure; operating beyond the rated pressure for a given flow range risks cell failure.
Can the shared cathode-anode channel configuration support independent gas environments for each electrode?
No, because the cathode and anode share a single flow channel, both electrodes are exposed to the same gas or liquid environment. This configuration is suitable when identical conditions are required for both electrodes. Researchers needing separate gas streams must use a dual-channel cell; electrodes, membranes, and gas diffusion layers are purchased separately.
What electrical and pressure infrastructure is required to safely operate the Atomfair high-pressure flow test cell?
The cell requires an AC 220 V, 50 Hz power supply and occupies 420 × 300 × 175 mm of bench space. For safe operation, the maximum pressure is 30 MPa at 0.10–20.00 mL/min and 20 MPa at 20.01–50.00 mL/min; exceeding these limits may cause catastrophic failure. The titanium body offers corrosion resistance, but proper pressure relief, gas handling protocols, and a compatible high-pressure supply are essential.
The Atomfair AF-HP-PFC1 gas diffusion high-pressure flow test cell delivers precise flow control (0.01–50 mL/min with 0.01 mL/min steps) and high-pressure operation up to 30 MPa, though the maximum pressure is flow-rate-dependent, dropping to 20 MPa above 20 mL/min, and requires a 220 V, 50 Hz power supply.
Positive
- High-pressure capability up to 30 MPa: Enables gas diffusion studies under realistic high-pressure conditions, with a maximum operating pressure of 30 MPa at flow rates between 0.10 and 20.00 mL/min.
- Precise flow control with fine resolution: Flow setting range of 0.01–50.00 mL/min with a step of 0.01 mL/min allows fine-tuning of reaction conditions for reproducible electrochemical measurements.
Trade-offs
- Flow-rate-dependent pressure limit: Maximum operating pressure decreases from 30 MPa to 20 MPa when flow rate exceeds 20.00 mL/min, requiring careful trade-off between flow and pressure for experiments.
- Specific power supply requirement: Operates on AC 220 V, 50 Hz only, which may necessitate a voltage converter or frequency adapter in laboratories with different electrical infrastructure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
