SpinRotor AS 30 2 Microtube RotorProduct Type: Centrifuge Rotor
Research-grade laboratory product
|
|||||||||||||||||||
|
|||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This rotor requires confirmation of centrifuge model, tube size, and rated speed before use to ensure safe operation. Compatibility is limited to the SpinCore M 0636 platform and specific tube-format configurations.
- Compatibility Constraint: The rotor is compatible only with the SpinCore M 0636 centrifuge platform and must be matched to the correct adapter and tube format.
- Operational Verification: Speed, RCF, temperature requirements, and sample-container format must be confirmed against the selected separation method prior to use.
Follow these steps to verify compatibility and install the rotor for safe centrifuge operation. Confirm all parameters before initiating any separation protocol.
Required Equipment: SpinCore M 0636 Centrifuge, Compatible Microtubes and Adapters
- Verify Centrifuge Model
Confirm that the centrifuge model is SpinCore M 0636 to ensure physical and electrical compatibility. - Select Tube Format and Adapter
Choose microtubes and adapters that match the rotor's specified geometry and rated speed requirements. - Check Speed and RCF Limits
Verify that the programmed speed and RCF do not exceed the rotor's maximum rated values for the selected tube configuration. - Install Rotor Securely
Mount the rotor onto the centrifuge drive shaft and tighten the locking mechanism according to the manufacturer's instructions. - Balance Load Before Run
Distribute tubes symmetrically and balance opposing loads to prevent vibration or mechanical stress during operation.
What is the maximum rated speed or RCF for the SpinRotor AS 30 2 Microtube Rotor when used with the SpinCore M 0636 centrifuge?
The product description does not specify a numeric maximum speed or RCF. Users must confirm the rated speed of the specific centrifuge model and tube size before use, as stated in the ordering note. This ensures safe operation and compatibility with the selected separation method.
Can the SpinRotor AS 30 2 Microtube Rotor be installed on any centrifuge, or is it limited to the SpinCore M 0636?
The SpinRotor AS 30 2 Microtube Rotor is explicitly compatible only with the SpinCore M 0636 centrifuge platform. The manufacturer requires confirmation of centrifuge model, tube size, and rated speed before quotation to ensure correct configuration.
What factors must be verified before installing the SpinRotor AS 30 2 Microtube Rotor to avoid equipment damage?
Before installation, the user must confirm centrifuge model compatibility, tube size and geometry, rated speed, and required RCF and temperature conditions. The product documentation emphasizes a procurement check to verify these parameters against the intended application to prevent operational failure.
The SpinRotor AS 30 2 Microtube Rotor is a dedicated rotor for small-volume separations on the SpinCore M 0636 centrifuge platform. Its deployment requires thorough pre-purchase verification of centrifuge model, tube geometry, and rated speed to ensure safe and correct operation.
Positive
- Microtube rotor for small-volume separations: The rotor is specifically designed for microtube formats, enabling efficient centrifugation of small sample volumes typical in molecular biology and biochemistry workflows.
- Compatible with SpinCore M 0636 platform: The rotor integrates directly with the SpinCore M 0636 centrifuge, providing a matched system for reliable and safe operation without adapter mismatch.
Trade-offs
- Must confirm compatibility before purchase: The rotor requires verification of centrifuge model, tube size, and rated speed prior to ordering to ensure proper fit and safe operation, as no universal compatibility is assumed.
- Limited to one centrifuge platform: The rotor is compatible only with the SpinCore M 0636 model, restricting its use to that specific centrifuge and preventing interchangeability with other laboratory centrifuges.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
