FREE SHIPPING with $59 or More. New Customer? Inquire for Major Discount & Free Samples! Online Payments & POs Accepted.

Low-Speed Clinical Centrifuge 4000 rpm M0424 ATOMFAIR®

Low-Speed Clinical Centrifuge 4000 rpm M0424 ATOMFAIR®

$542.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Clinical low-speed centrifuge, 500–4000 rpm in 100 rpm steps, 2500 × g max RCF, LCD, 1–99 min timer, and 6×15 mL to 4×50 mL rotors. Order now.

SKU: AF-EI-C-CENF-04KR-M424
Category:
Tags: , ,
Brands:

SpinCore M 0424 Clinical Low-Speed Centrifuge, 500-4000 rpm, step 100 rpm

Product Type: Low-Speed Centrifuge
Research-grade laboratory product

Product Overview

Low-Speed Centrifuge with 500-4000 rpm, step 100 rpm, 2500 × g and Swing rotor 6 x 15 mL; swing rotor 4 x 50 mL; angle rotor 24 x 15 mL; angle rotor 12 x 10 mL or 8 x 15 mL supports laboratory centrifugation, sample separation and tube-processing workflows.

The specification table keeps speed, RCF, rotor capacity, timing, motor, safety, power, dimensional and temperature data visible for configuration review.

Performance Features
  • Speed capability of 500-4000 rpm, step 100 rpm supports method-specific centrifugation.
  • Maximum RCF of 2500 × g supports force-based separation review.
  • Rotor capacity of Swing rotor 6 x 15 mL; swing rotor 4 x 50 mL; angle rotor 24 x 15 mL; angle rotor 12 x 10 mL or 8 x 15 mL supports tube and throughput matching.
  • Listed timer, motor, safety, power and dimensional parameters support procurement and installation confirmation.

Technical Specifications
Parameter Specification / Available Values
Atomfair Model AF-SPCENM0424-500TO4000RPM
Speed range 500-4000 rpm, step 100 rpm
Maximum RCF 2500 × g
Speed accuracy ±100 rpm
Rotor capacity Swing rotor 6 x 15 mL; swing rotor 4 x 50 mL; angle rotor 24 x 15 mL; angle rotor 12 x 10 mL or 8 x 15 mL
Running time 1-99 min, continuous operation
Display LCD
Program storage Blood, urine and stool sample programs
Dimensions 364 x 440 x 268 mm
Weight 14.5 kg

Selection and Use Notes
  • Confirm rotor, adapter and tube compatibility before quotation.
  • Confirm speed, RCF, temperature requirement and sample-container format against the selected method.
PROCUREMENT CHECK: Confirm model, working range, compatibility, consumables and required configuration before quotation.
DOCUMENTATION REVIEW: Product specifications and configuration details are reviewed against laboratory use requirements.
ACCESSORY MATCHING: Compatible accessories, replacement parts and consumables can be matched according to the selected configuration.
RFQ NOTE: Include the required model, configuration and quantity when requesting quotation support.
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®

The centrifuge must be placed on a stable, level surface with adequate clearance for heat dissipation and vibration isolation. Electrical supply must match the rated voltage and frequency to prevent motor damage or safety interlock failure.

  • Rotor and Tube Compatibility: Only use rotors and tubes explicitly rated for the selected speed and RCF to avoid mechanical failure or sample leakage.
  • Load Balancing Requirement: Opposing tubes must be balanced by weight within the rotor's specified tolerance to prevent excessive vibration and bearing wear.
  • Operational Temperature Range: Operate the centrifuge within an ambient temperature range of 15–30 °C to ensure consistent motor performance and electronic reliability.

This procedure covers initial setup, rotor installation, sample loading, and program selection for routine centrifugation. Follow each step sequentially to ensure safe operation and reproducible separation results.

Required Equipment: Approved rotor and tube set, Balance scale for tube weight matching

  1. Inspect the centrifuge chamber and rotor
    Inspect the centrifuge chamber for debris or moisture and confirm the rotor is securely seated on the drive spindle.
  2. Load and balance sample tubes
    Load sample tubes into the rotor in symmetrical pairs, ensuring each pair is weight-balanced to within 0.1 g using a balance scale.
  3. Close and lock the lid
    Close the centrifuge lid firmly until the latch engages, confirming the safety interlock is activated.
  4. Set speed, time, and program parameters
    Set the desired speed (500–4000 rpm in 100 rpm increments), running time (1–99 min or continuous), and select a stored program if applicable via the LCD interface.
  5. Start the centrifugation run
    Press the start button to begin the run, monitoring the display for stable speed and timer countdown.
  6. Wait for complete stop before opening lid
    Wait for the rotor to come to a complete stop before releasing the lid lock to access samples.

How does the 100 rpm step size and ±100 rpm accuracy affect the reproducibility of RCF for low-speed cell separation protocols?

The step size of 100 rpm means the closest achievable speed to a target may be off by up to 50 rpm, and the accuracy of ±100 rpm adds additional uncertainty. At the maximum RCF of 2500 × g, this corresponds to approximately ±125 × g variability. For protocols requiring precise g-force, such as platelet-rich plasma preparation, this tolerance may be acceptable for clinical low-speed work but should be verified against method requirements.

What tube configurations are available for the M 0424 centrifuge, and are adapters provided for non-standard tube sizes?

The centrifuge offers swing rotors for 6 x 15 mL and 4 x 50 mL tubes, and angle rotors for 24 x 15 mL, 12 x 10 mL, or 8 x 15 mL tubes. The description does not mention adapter availability or compatibility with microtubes, vacutainers, or PCR strips. Adapter compatibility must be confirmed with the manufacturer before use.

What are the benchtop space and power requirements for installing the SpinCore M 0424 centrifuge in a clinical lab?

The centrifuge dimensions are 364 x 440 x 268 mm and it weighs 14.5 kg, requiring a standard benchtop area. The product description does not specify electrical power requirements, so standard lab power supply (e.g., 110-240 V, 50/60 Hz) is typical for this class of centrifuge, but users should confirm with the manufacturer for their region.

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).

Related products