3.95V 240Wh/kg Semi-Solid Battery 20Ah Series | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Store cells in a dry, cool environment with moisture-barrier vacuum-sealed packaging to prevent degradation. Always use a compatible BMS with over-discharge, over-current, and cell balancing protection, and charge within the manufacturer's recommended voltage range.
- Moisture Sensitivity: Cells are shipped in moisture-barrier vacuum-sealed bags and must be stored in a dry, low-humidity environment.
- Temperature Limits: Avoid exposing cells to excessive temperatures for extended periods to prevent thermal runaway or capacity loss.
- Electrical Safety: A compatible BMS must be used for over-discharge, over-current, and cell balancing protection.
- Charge Restrictions: Charge only within the manufacturer's recommended voltage range and at a maximum rate of 2C.
- Disposal Requirements: Dispose of cells in accordance with local regulations for lithium-based batteries.
Pre-condition new cells at a suitable temperature before first use to ensure optimal performance. Always connect a compatible BMS and follow the manufacturer's charge, discharge, and storage guidelines.
Required Equipment: Compatible Battery Management System (BMS)
- Pre-condition cells
Pre-condition new cells at a suitable temperature before first use. - Connect BMS
Connect a compatible BMS with over-discharge, over-current, and cell balancing protection. - Charge within limits
Charge within the manufacturer's recommended voltage range at a maximum rate of 2C. - Operate within discharge limits
Do not exceed the rated peak discharge duration of 10C for the specified time. - Store properly
Store cells in a dry, cool environment in moisture-barrier packaging when not in use. - Dispose responsibly
Dispose of cells in accordance with local regulations for lithium-based batteries.
How does the 240Wh/kg energy density of the ATOMFAIR 3.95V Semi-Solid Battery series affect its charge and discharge rate capabilities?
The series achieves 240Wh/kg while supporting 2C charge, 5C continuous discharge, and 10C peak discharge, providing both high energy density and high rate capability. This is enabled by the semi-solid electrolyte design, which enhances thermal stability and reduces leakage risk, allowing aggressive power delivery without compromising safety. The 20Ah nominal capacity per cell is consistent across all four configurations.
What voltage configurations are available in the ATOMFAIR 3.95V 240Wh/kg Semi-Solid Battery 20Ah Series, and how do they affect system integration?
The series offers four configurations: 6S (23.7V), 8S (31.6V), 12S (47.4V), and 18S (71.1V), all based on 3.95V nominal cell voltage. These options allow designers to match the battery pack voltage to specific drone, robotics, or portable power station requirements while maintaining identical 20Ah capacity and 240Wh/kg energy density. The varying dimensions (e.g., 54×89×205mm for 6S to 156×89×205mm for 18S) accommodate different physical footprints.
What safety measures are critical when integrating semi-solid electrolyte batteries like the ATOMFAIR series into a system?
A compatible BMS with over-discharge, over-current, and cell balancing protection is mandatory. The semi-solid electrolyte design inherently reduces leakage risk and improves thermal stability compared to liquid electrolytes, but precautions such as charging within the recommended voltage range, avoiding prolonged exposure to excessive temperatures, and pre-conditioning new cells before first use are still required. The peak 10C discharge rate must not be exceeded in duration, and cells must be disposed of per local regulations.
The ATOMFAIR 3.95V 240Wh/kg semi-solid battery series offers high energy density and high rate capability in flexible voltage configurations, but requires careful thermal management and a compatible BMS for safe operation.
Positive
- High energy density 240Wh/kg: Enables longer runtime in lightweight designs, ideal for UAVs and portable devices.
- High rate capability: Supports 2C fast charge, 5C continuous discharge, and 10C peak discharge for power-hungry applications.
Trade-offs
- Requires compatible BMS: Must use a BMS with over-discharge, over-current, and cell balancing protection to ensure safe operation.
- Temperature sensitivity: Avoid exposure to excessive temperatures for extended periods and pre-condition new cells before first use.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
