Description
72V Step-Through Motive Battery Pack Series (20S1P Pouch Cell Horizontal Grade)COMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR FLEETS
Contact our engineering team for technical support, protocol documentation, or bulk quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||||||||
|
Manufacturer: PRODUCTION DIVISION · ADVANCED ENERGY STORAGE DIVISION
Brand: INDUSTRIAL TESTING HARDWARE
Specifications are representative and subject to change without notice. For the latest version and compliance certificates, contact official sales channel.
|
|||||||||||||||||||||||||||||||
Store the battery pack in a cool, dry environment away from direct sunlight and moisture. Avoid mechanical shock, piercing, or crushing that could compromise the cell integrity.
- Temperature Range: Operate and store the pack between 0°C and 45°C during charging and –20°C to 60°C during discharge.
- Charging Equipment: Use only the specified lithium battery charger with overcurrent, overvoltage, and short-circuit protection.
- Physical Integrity: Inspect the pack housing and connectors for cracks, deformation, or leakage before each installation.
- Short-Circuit Prevention: Keep the battery terminals covered with insulating caps when not connected to a load or charger.
- Disposal: Discharge the pack to below 30V and recycle only at a certified lithium-ion battery collection facility.
Follow these steps to install the battery pack into the step-through compartment of an e-motorcycle. Ensure all personnel wear insulated gloves and eye protection during the process.
Required Equipment: Insulated gloves, Safety goggles, Voltage multimeter
- Pre-Installation Inspection
Inspect the battery pack for any visible damage, swelling, or leakage before handling. - Voltage Verification
Measure the pack voltage across the main terminals and confirm it is within the nominal 72V range. - Mounting the Pack
Place the battery pack horizontally into the step-through compartment ensuring the orientation markers align correctly. - Securing the Pack
Fasten the retaining brackets or straps to immobilize the battery pack during vehicle operation. - Electrical Connection
Connect the main power harness to the battery terminals, ensuring polarity matches and connections are tight. - System Communication Check
Verify that the battery management system communicates with the vehicle dashboard. - Final Safety Verification
Check for any loose connections, exposed wires, or error codes before closing the battery compartment.
What is the cycle life trade-off between the 35Ah and 50Ah variants of the 72V 20S step-through battery pack under continuous high-load delivery operations?
Both the 35Ah and 50Ah variants are rated for over 2500 deep discharge cycles to ≥70% capacity retention, so there is no cycle life trade-off between the two capacity options. The 35Ah pack delivers 2520 Wh of typical energy, while the 50Ah pack provides 3600 Wh, enabling longer range per charge without compromising long-term durability.
Can the 72V 20S step-through battery pack integrate with existing CAN-based vehicle dashboards and battery swapping network telemetry systems?
Yes, the pack integrates natively with CAN bus, RS485, Bluetooth, and One-line dashboard protocols via its multi-protocol telemetry module, enabling direct communication with vehicle dashboards and smart battery swapping network infrastructure. This allows delivery fleet operators to track real-time system performance under continuous high-load operations.
What are the physical and environmental constraints for installing the 72V 20S step-through battery pack in an e-motorcycle frame?
The pack is designed for horizontal under-floorboard or step-through frame zones, with dimensions of 345 × 226 × 175 mm for the 35Ah variant and 350 × 216 × 175 mm for the 50Ah variant. It features IPX7 environmental protection, ensuring safe operation against flood immersion, heavy downpours, and high-humidity swap cabinets, making it suitable for outdoor urban delivery fleets.
This 72V 20S1P lithium-ion battery pack is purpose-built for horizontal under-floor integration in step-through e-motorcycles, offering 2520 Wh or 3600 Wh energy capacities, IPX7 sealing, and multi-protocol telemetry for fleet management.
Positive
- Extended cycle life over 2500 deep discharges: Rated for over 2500 deep discharge cycles to ≥70% capacity, reducing total cost of ownership for high-utilization urban fleets.
- IPX7-rated environmental sealing: Industrial-grade hermetic shell provides uncompromised protection against flood immersion, heavy rain, and high-humidity swap cabinet environments.
Trade-offs
- Sub-zero optimization limited to 35Ah variant: Only the 35Ah assembly is explicitly described as sub-zero optimized; the 50Ah maximum-range variant may exhibit reduced cold-weather performance.
- Form factor restricts chassis compatibility: The horizontal under-floor design is specific to step-through motorcycle frames, limiting retrofit or alternative vehicle integration without structural modification.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
