Description
72V Vertical Motive Battery Pack Series (20S1P Pouch Cell Swapping Grade)COMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR FLEETS
Contact our engineering team for technical support, protocol documentation, or bulk quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||||||||
|
Manufacturer: PRODUCTION DIVISION · ADVANCED ENERGY STORAGE DIVISION
Brand: INDUSTRIAL TESTING HARDWARE
Specifications are representative and subject to change without notice. For the latest version and compliance certificates, contact official sales channel.
|
|||||||||||||||||||||||||||||||
This battery pack requires controlled environmental storage to preserve electrochemical stability and prevent thermal runaway. Proper containment and isolation from conductive pathways are mandatory during handling and transport.
- Thermal Management: Store and operate the pack within specified ambient temperature ranges to avoid accelerated aging and safety risks.
- Electrical Isolation: Prevent short circuits by keeping terminals covered and using insulated tools during installation or removal.
- Mechanical Orientation: Maintain the pack in vertical orientation during transport and storage to align with swapping station rails.
- Charge Level Storage: Store at a partial state of charge between 40% and 60% when not in use for extended periods to minimize capacity fade.
Follow these steps to safely prepare and install the battery pack into a compatible swapping station. Proper alignment and electrical verification are critical before operation.
Required Equipment: Insulated rubber gloves, Calibrated digital multimeter, Swapping cabinet with vertical guide rails
- Inspect Pack
Inspect the battery pack casing for cracks, swelling, or leakage before handling. - Verify Voltage
Verify the pack voltage matches the nominal 72V specification using a calibrated multimeter. - Align With Tracks
Align the pack's guide rails with the vertical tracks of the swapping cabinet. - Insert Pack
Insert the pack smoothly until it locks into place with an audible click. - Confirm Connection
Confirm electrical connection by checking the system status indicator lights. - Secure Cabinet
Secure the cabinet door and ensure the pack is mechanically retained. - Run Diagnostic
Run a system diagnostic cycle from the operator interface to validate full integration.
What is the cycle life trade-off between the 35Ah and 50Ah variants of the 72V 20S vertical e-motorcycle battery pack?
Both the 35Ah and 50Ah variants are rated for over 2500 deep discharge cycles to ≥70% capacity retention, so there is no cycle life trade-off between the two. The primary difference is energy capacity: the 35Ah module delivers 2520 Wh typical energy, while the 50Ah module provides 3600 Wh, enabling extended range at the cost of a slightly taller physical pack (340 mm vs. 310 mm height).
Can this vertical battery pack be integrated into existing third-party battery swapping networks that use horizontal or non-standard cabinet slots?
No, this pack is specifically engineered for vertical swapping profiles with dimensions of 232 × 175 × 310 mm (35Ah) or 222 × 175 × 340 mm (50Ah), designed to fit standard commercial vertical cabinet slots. Integration into horizontal or non-standard cabinets would require mechanical modification, as the structural enclosure form factor is optimized for automated vertical track systems.
What environmental protection and communication protocols are required for safe operation of this battery pack in outdoor swapping stations?
The pack features IPX7 hermetic sealing, ensuring protection against flood immersion and heavy downpours, making it suitable for outdoor swapping stations. It requires native multi-protocol connectivity via Bluetooth, RS485, and CAN bus for telemetry and system integration, which are all integrated into the module.
72V 20S1P vertical pouch lithium battery pack engineered for smart swapping networks, providing 2520 Wh or 3600 Wh energy options with IPX7 environmental sealing and rated for over 2500 deep discharge cycles to 70% capacity.
Positive
- Enhanced cycle durability: Rated for over 2500 deep discharge cycles to ≥70% capacity, significantly reducing total cost of ownership for large urban fleets.
- IPX7 environmental protection: Industrial-grade hermetic shell sealing ensures safe operation under flood immersion, heavy rain, and high-humidity swap cabinet environments.
Trade-offs
- Specialized swapping form factor: The vertical enclosure profile is engineered specifically for automated smart battery swapping network infrastructure, limiting compatibility to standard vertical cabinet compartments.
- Limited capacity variants: Only two fixed capacity options (35Ah and 50Ah) are available, with no intermediate capacities offered between these streams.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
