Description
60V Motive Battery Pack Series (17S1P Pouch Cell Grade) | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||
The battery pack contains lithium-ion cells with high energy density and requires strict temperature and humidity control to ensure safe operation and longevity. Physical damage, short circuits, or exposure to extreme temperatures may lead to thermal runaway or capacity degradation.
- Operating Temperature Range: The 35Ah variant is capable of deep energy extraction down to -30°C, but sustained operation at extreme cold reduces cycle life.
- Storage Environment: Store the pack in a dry, cool environment with relative humidity below 60% and away from direct sunlight.
- Physical Integrity: Inspect the pack casing for cracks, swelling, or leakage before each use and do not use if damaged.
- Charging Conditions: Charge the pack using only the specified charger within the recommended temperature range to prevent overcharging and thermal events.
- Thermal Management: Ensure unobstructed airflow around the pack's surfaces during operation to maintain effective heat dissipation.
These steps ensure safe installation and operation of the high-voltage lithium battery pack in a commercial swapping network. Proper verification of voltage and mechanical integrity prevents electrical hazards and equipment damage.
Required Equipment: Digital multimeter with insulated probes, Insulated gloves rated for Category IV
- Inspect Battery Pack
Inspect the pack's exterior for any signs of physical damage, swelling, or electrolyte leakage before handling. - Measure Open Circuit Voltage
Measure the pack's open circuit voltage using a digital multimeter to confirm it is within the nominal 61.2V range. - Align and Insert Pack
Align the pack's connector with the vehicle's battery bay interface and insert it fully until the locking mechanism engages. - Verify Connection and Operation
Verify the electrical connection by checking for proper voltage at the output terminals and monitor the pack's temperature during initial operation.
What is the trade-off between the 35Ah and 50Ah variants of the 60V 17S e-motorcycle battery pack for cold-climate fleet operations?
The 35Ah variant is optimized for sub-zero operation down to -30 °C, enabling deep energy extraction in extreme cold, while the 50Ah variant delivers higher cumulative energy of 3000 Wh but is limited to a standard thermal discharging range of -20 °C to +55 °C. Both packs share a 17S1P topology and 3.0C continuous discharge rate, so the choice depends on whether low-temperature performance or maximum range per charge is prioritized.
Can the 60V 17S lithium battery pack be integrated into existing smart battery swapping networks with CAN or RS485 communication?
Yes, the pack includes an integrated telemetry module with native support for Bluetooth, RS485, and industrial CAN bus protocols, enabling direct data reporting and compatibility with smart battery swapping infrastructure. The IPX7-rated hermetic shell ensures safe operation in high-humidity swap cabinets, and the 17S1P pouch cell layout maintains thermal dissipation paths critical for rapid exchange cycles.
What are the handling and storage requirements for the 60V 17S pouch cell battery pack to ensure safety and cycle life?
The pack requires storage within its thermal discharging range of -30 °C to +55 °C for the 35Ah variant or -20 °C to +55 °C for the 50Ah variant, and must be kept in a dry environment to maintain IPX7 seal integrity. The soft pouch architecture demands careful handling to avoid mechanical shock, though the enclosure provides multi-directional damping; for long-term storage, maintain a partial state of charge to preserve the rated 2500 deep discharge cycles to ≥70% capacity.
This 60V 17S industrial e-motorcycle battery series offers two capacity variants with distinct thermal operating windows: the 35Ah pack operates down to -30°C while the 50Ah pack is limited to -20°C. Both variants deliver over 2500 deep discharge cycles and IPX7 environmental protection, but deployment requires compatible smart-swapping infrastructure and multi-protocol telemetry integration.
Positive
- Sub-zero capable cold-weather option: The 35Ah variant supports continuous discharge down to -30°C, enabling reliable e-motorcycle operation in extreme cold climates without performance degradation.
- Extended cycle life for fleet use: Rated for over 2500 deep discharge cycles to 70% capacity retention, significantly lowering total cost of ownership for high-utilization urban logistics fleets.
Trade-offs
- 50Ah variant cold limits: The extended-range 50Ah module is restricted to -20°C minimum operating temperature, compared to -30°C for the 35Ah pack, narrowing its deployment envelope in frigid environments.
- Smart-swap infrastructure dependence: The battery is engineered for a commercial smart battery swapping network, requiring compatible cabinets and integration with Bluetooth, RS485, or CAN protocols for full functionality.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
