ATOMFAIR® EB82G-01MG-R-02 ANALYTICAL & SEMI-MICRO BALANCEEB82G-01MG-R-02 CORE SPECIFICATION PLATFORM
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED INDUSTRIAL LAB SOLUTIONS
Contact our elite laboratory engineering team for institutional bulk procurement quotes or interface custom integration.
EMAIL: INQUIRY@ATOMFAIR.COM
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
MANUFACTURER OPERATIONS: ATOMFAIR LLC INSTRUMENTS DIVISION
REGISTERED BRAND: ATOMFAIR®
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The balance requires an operating temperature of 10°C to 33°C and humidity between 20% and 80% RH to maintain specified accuracy. A mandatory warm-up period of 30 to 60 minutes is required after power-on before zeroing, calibration, or sample addition.
- Environmental Conditions: Operating temperature must remain between 10°C and 33°C and humidity between 20% and 80% RH to prevent drift or error.
- Warm-up Requirement: Allow the balance to warm up for 30 to 60 minutes after power-on before performing zeroing, internal calibration, or sample addition.
- Calibration Triggers: The internal isbl calibration automatically executes when ambient temperature changes by ≥1.5°C or after 2 hours of operation.
- Stabilization Time: Wait at least 5 seconds after sample placement for the reading to stabilize before recording.
- Vibration Isolation: The split-body design isolates hand-induced micro-vibrations from the weighing base; avoid touching the base during measurement.
This balance provides high-accuracy weighing with 0.01 mg readability and internal automated calibration. Follow these steps to ensure precise measurements and proper operation.
Required Equipment: Glass draft shield, Internal calibration system (ISBL)
- Warm-up the balance
Allow the balance to warm up for 30 to 60 minutes after power-on before any operation. - Verify environmental conditions
Verify that the ambient temperature is between 10°C and 33°C and humidity between 20% and 80% RH. - Perform zeroing
Press the tare or zero key to zero the balance after warm-up and before calibration or sample addition. - Initiate internal calibration
Initiate manual internal calibration if the automatic trigger has not occurred or if required by protocol. - Place sample and record reading
Place the sample on the weighing pan, close the draft shield, and wait for the stabilization indicator before recording the weight.
How does the dual-range readability (0.01 mg vs 0.1 mg) affect measurement accuracy and capacity on the EB82G-01MG-R-02?
The EB82G-01MG-R-02 offers an automated dual-range matrix with readability of 0.01 mg and 0.1 mg, corresponding to maximum capacities of 82 g and 120 g respectively. The 0.01 mg range provides higher resolution for smaller samples up to 82 g, while the 0.1 mg range extends capacity to 120 g with lower resolution. This allows the user to select the optimal balance between precision and capacity for their specific application.
What are the warm-up and calibration requirements for the EB82G-01MG-R-02 to ensure measurement accuracy?
The balance requires a mandatory preheating threshold of 30 to 60 minutes following power-on initialization before performing operational zeroing, internal calibration, or sample addition. It features autonomous fully automatic isbl calibration that executes if ambient temperature fluctuates by ≥1.5°C or if time elapsed exceeds 2 hours, with manual override available.
Can the EB82G-01MG-R-02 be integrated with external data systems for automated data logging?
Yes, the balance is equipped with a standard RS232 communication interface that supports bidirectional data pipelines to micro-printers and host computer terminals, enabling automated data logging and paperless compliance tracking.
The ATOMFAIR EB82G-01MG-R-02 analytical semi-micro balance delivers 0.01 mg readability and 82 g capacity with dual-range flexibility to 120 g, internal automated calibration, and a split-body design that isolates vibration, but requires a 30–60 minute warm-up and controlled environmental conditions (10–33°C, 20–80% RH) for rated performance.
Positive
- Internal Automated Calibration (isbl): The balance autonomously recalibrates when ambient temperature changes by ≥1.5°C or after 2 hours, ensuring long-term accuracy without manual intervention.
- Split-Body Vibration Isolation: The detached control display unit isolates hand-induced micro-vibrations from the base chassis, improving measurement stability in sensitive analytical workflows.
Trade-offs
- Mandatory Warm-Up Period: A 30–60 minute power-on stabilization period is required before calibration or sample measurement to achieve specified linearity and repeatability.
- Environmental Sensitivity Constraints: The balance requires controlled laboratory conditions (10–33°C, 20–80% RH) and a 220V AC/50Hz power supply, limiting deployment in non-standard facilities.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
