|
Molybdenum Evaporation Boat Set, Non Splash Type, Oval Tub, 0.1 x 9 x 80 mm
Product Type: Evaporation Boat Set
Research-grade laboratory product
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document outlines the environmental and electrical constraints for safe use of the molybdenum evaporation boat. The boat requires a vacuum environment and precise electrical matching to prevent overheating or oxidation.
- Storage Atmosphere: Store the boat in a dry, inert atmosphere to prevent oxidation of the molybdenum surface.
- Electrical Limits: Do not exceed the rated 1.95 V, 78 A, and 152 W to avoid thermal runaway.
- Vacuum Requirement: Use the boat only in a vacuum chamber to prevent high-temperature oxidation and material degradation.
- Temperature Ceiling: Never exceed the maximum temperature of 1400 °C to avoid structural failure.
- Contamination Control: Handle the boat with clean gloves to avoid contamination that could affect evaporation performance.
This procedure describes the safe installation and operation of the molybdenum evaporation boat in a vacuum evaporation system. Proper matching of electrical and mechanical parameters is essential to prevent damage.
Required Equipment: Vacuum evaporation system with source holder, Resistive heating power supply, Clean gloves
- Check Source Holder Compatibility
Confirm that the boat's dimensions and tub geometry match the source holder specifications. - Verify Power Supply Rating
Verify that the power supply can deliver the rated voltage, current, and power values. - Install the Boat
Install the boat securely into the source holder, ensuring proper contact for electrical conductivity. - Load Evaporant Material
Load the evaporant material into the tub, not exceeding the 0.5 cc capacity. - Evacuate the Chamber
Close the vacuum chamber and pump down to the required pressure before applying power. - Apply Power Gradually
Gradually increase power to the rated levels while monitoring temperature and evaporation rate. - Cool Down After Evaporation
After evaporation, reduce power to zero and allow the boat to cool before venting the chamber.
What is the maximum temperature rating and electrical power requirement for the ATOMFAIR non splash type molybdenum evaporation boat (0.1 x 9 x 80 mm)?
The maximum temperature rating is 1400 °C. The electrical rating is 1.95 V, 78 A, and 152 W. These values must be matched with the power supply and evaporation process requirements.
How do I confirm that this molybdenum evaporation boat set is compatible with my evaporation source holder and power supply?
Confirm the boat material, overall dimensions (0.1 mm thickness, 9 mm width, 80 mm length), tub geometry (oval tub with upper part 0.10, middle part 0.05, bottom part 0.10), and tub capacity (0.5 cc) against the source holder. Also match the voltage, current, and power values (1.95 V, 78 A, 152 W) with the available resistive-heating power supply.
What are the key specifications of the oval tub in this molybdenum evaporation boat set for source loading?
The oval tub has a length of 40 mm, a depth of 2.5 mm, and a capacity of 0.5 cc. The configuration is non splash type with upper part 0.10, middle part 0.05, bottom part 0.10, which is part of the product selection information.
This molybdenum evaporation boat set features a non-splash oval tub geometry with 0.5 cc capacity and 1400 °C maximum temperature, designed for precise vacuum evaporation processes. The product requires careful matching of dimensions and electrical ratings with existing source holder and power supply components.
Positive
- Molybdenum construction for high-temperature vacuum evaporation: The molybdenum material provides a maximum operating temperature of 1400 °C, suitable for resistive-heating evaporation of various materials in vacuum systems.
- Defined non-splash geometry with specified tub dimensions: The oval tub geometry with 0.5 cc capacity and precise dimensions (0.1 mm thickness, 9 mm width, 80 mm length) enables accurate source loading and dimensional matching to the evaporation source holder.
Trade-offs
- Requires precise matching with source holder and power supply: The boat dimensions, tub geometry, and electrical ratings (1.95 V, 78 A, 152 W) must be confirmed compatible with the evaporation source holder and resistive-heating power supply before ordering.
- Limited tub capacity of 0.5 cc: The small tub volume restricts the amount of source material that can be loaded per evaporation cycle, potentially requiring more frequent refills for larger depositions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
