LFP Low-Temperature Battery Pack for Mining Trucks (93.184 kWh / 332.8V) | ATOMFAIRCOMMERCIAL GRADE PRODUCTION
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This battery pack requires strict environmental and operational constraints to ensure safety and longevity. The pack must be operated within -35°C to 60°C, with a properly maintained liquid cooling system and sealed connectors to maintain IP67 protection.
- Temperature Range: Operate the battery pack only within the ambient temperature range of -35°C to 60°C to prevent thermal runaway or capacity degradation.
- Cooling System Maintenance: Maintain the liquid cooling system with approved coolant and inspect for leaks to ensure consistent thermal management under load.
- Connector Sealing: Verify that all electrical connectors are clean, dry, and securely sealed to preserve the IP67 ingress protection rating.
- Charging Compatibility: Use only LFP-compatible charging equipment to avoid overvoltage, overcurrent, or chemical imbalance.
- End-of-Life Disposal: Dispose of the battery pack according to local hazardous waste regulations after its service life.
This guide provides essential steps for safe handling and operation of the battery pack. Follow these instructions to prevent electrical hazards and ensure optimal performance.
Required Equipment: LFP compatible charger
- Inspect the pack
Inspect the battery pack for any physical damage, leakage, or corrosion before deployment. - Verify cooling system
Verify that the liquid cooling system is filled with approved coolant and free of leaks or blockages. - Seal connectors
Confirm that all electrical connectors are clean, dry, and securely sealed to maintain IP67 protection. - Connect to charger
Connect the battery pack to a compatible LFP charger using the designated charging port. - Monitor temperature
Monitor the battery pack temperature continuously during operation to ensure it stays within -35°C to 60°C. - Respond to abnormalities
Disconnect the charger and isolate the battery pack immediately if any abnormality such as overheat or swelling is detected. - Dispose responsibly
Dispose of the end-of-life battery pack according to local hazardous waste regulations.
What are the thermal management requirements for the ATOMFAIR LFP low-temperature battery pack in mining truck applications?
The battery pack requires a properly maintained liquid cooling system to ensure optimal thermal management under high-load conditions. The operating temperature range is -35°C to 60°C, and the IP67 protection rating demands that all connectors be securely sealed to prevent ingress. Failure to maintain the cooling system or seal integrity can compromise performance and safety in extreme mining environments.
Can this 93.184 kWh LFP battery pack be integrated into a 220-tonne mining truck for electric retrofitting?
Yes, the battery pack is explicitly designed for 220-tonne mining truck electric retrofitting and heavy engineering equipment power systems. With a rated voltage of 332.8 V and rated energy of 93.184 kWh, it provides robust power for such applications. However, integration requires compatible LFP charging equipment and proper sealing of all connectors to maintain IP67 protection.
What safety and handling precautions are required for the ATOMFAIR LFP battery pack during operation and disposal?
The battery pack must not be disassembled, deformed, short-circuited, or incinerated. Use only compatible LFP charging equipment, and in case of abnormality, disconnect immediately and contact qualified service personnel. End-of-life batteries must be disposed of according to local regulations. The IP67 rating and liquid cooling system require regular maintenance to ensure safe operation in mining environments.
This 93.184 kWh LFP battery pack rated at 332.8V provides IP67 dust/water ingress protection and liquid cooling for sustained high-load operation, with a certified operating range of -35°C to 60°C for extreme mining environments.
Positive
- Wide operating temperature range: The battery pack operates reliably from -35°C to 60°C, adapting to extreme mining environments without performance degradation.
- Liquid cooling for thermal management: The integrated liquid cooling system maintains optimal operating temperature under high-load conditions, ensuring consistent power delivery and prolonging cycle life.
Trade-offs
- Heavy weight requires handling equipment: At 660 ± 20 kg, the pack demands mechanical lifting equipment and reinforced mounting structures for installation in mining trucks or stationary systems.
- Liquid cooling system maintenance required: The liquid cooling system requires periodic inspection and proper sealing of connectors to preserve IP67 protection and prevent thermal runaway under sustained high-load operation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
