ATOMFAIR® EB210G-0.1MG-R-07 DUAL-RANGE ELECTROMAGNETIC ANALYTICAL BALANCEEXTERNAL CALIBRATION
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This analytical balance requires a 30-minute pre-heating phase to stabilize the electromagnetic force compensation sensor before calibration. The draft shield must be fully sealed when performing semi-micro weighing at 0.01 mg readability to avoid air currents.
- Pre-heating Requirement: Allow a 30-minute system pre-heating phase to let the electromagnetic core reach full equilibrium prior to initializing calibration sequences.
- Draft Shield Sealing: Ensure the three-door draft shield housing is entirely sealed for hundred-thousandth semi-micro weighing verification routines at 0.01 mg readability.
- Leveling Procedure: Use the front-facing bubble spirit level indicator and heavy-duty micro-threaded leveling feet to achieve proper environmental alignment.
- External Calibration Protocol: Follow the manual external calibration protocol to guarantee predictable user-verified linearity points.
These steps ensure the balance reaches thermal equilibrium and is properly leveled for accurate external calibration. The draft shield must be sealed during high-precision measurements to minimize air current interference.
Required Equipment: Bubble spirit level indicator, Micro-threaded leveling feet, Certified external calibration weight
- Level the balance
Position the balance on a stable surface and adjust the leveling feet until the bubble spirit indicator is centered. - Power on and preheat
Power on the balance and allow a 30-minute pre-heating phase for the electromagnetic core to reach full equilibrium. - Seal the draft shield
Close all three doors of the draft shield housing to ensure an isolated ambient chamber before weighing. - Perform external calibration
Execute manual external calibration using a certified weight to verify linearity and repeatability within specified tolerance.
What are the dual-range capacity and readability specifications of the EB210G-0.1MG-R-07 analytical balance?
The EB210G-0.1MG-R-07 offers a dual-range matrix: maximum capacity of 210 g with 0.1 mg readability, and 120 g with 0.01 mg readability. Repeatability is ±0.6 mg for the 210 g range and ±0.06 mg for the 120 g range, with linearity matching those values.
Does the EB210G-0.1MG-R-07 use internal or external calibration?
The EB210G-0.1MG-R-07 uses external calibration. It is part of the FB series, which employs manual external calibration protocols, as opposed to the FA series with automated internal calibration. This allows user-verified linearity points during routine verification.
What preparation is required before using the EB210G-0.1MG-R-07 at 0.01 mg readability?
For semi-micro weighing at 0.01 mg, ensure the three-door glass draft shield is fully sealed and allow a 30-minute system pre-heating phase for the electromagnetic core to reach equilibrium before initiating calibration sequences.
The ATOMFAIR® EB210G-0.1MG-R-07 is a dual-range electromagnetic analytical balance offering 210 g / 120 g capacity with 0.1 mg / 0.01 mg readability, using a rear-mounted EMFC sensor and external calibration. Its glass draft shield and RS232 interface support stable weighing and data logging, but the 0.01 mg readability requires a 30-minute pre-heating phase and sealed draft shield for accurate operation.
Positive
- Dual-range capacity and readability: Provides 210 g / 120 g maximum capacity with 0.1 mg / 0.01 mg readability, enabling precise weighing of both larger and micro-scale samples on a single instrument.
- Rear-mounted EMFC sensor stability: High-sensitivity, ultra-stable rear-mounted electromagnetic force compensation sensor maximizes structural resolution limits for consistent measurement performance.
Trade-offs
- External calibration requirement: Uses manual external calibration protocols, requiring user intervention to verify linearity points, unlike automated internal calibration in companion FA series.
- Pre-heating and sealing needed for 0.01 mg: For 0.01 mg readability, the draft shield must be fully sealed and a 30-minute system pre-heating phase is required to reach electromagnetic core equilibrium before calibration.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
