Coating Corrosion Test Cell, Single-Layer | ATOMFAIRProduct Type: Electrochemical cell
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
Proper O-ring sealing and copper tape replacement are critical for reliable electrochemical measurements. Material compatibility must be verified for aggressive chemical environments to prevent cell degradation.
- O-ring sealing: Ensure proper O-ring sealing before each experiment to prevent electrolyte leakage.
- Copper tape replacement: Replace copper tape after each use to maintain optimal electrical conductivity.
- Material compatibility: Verify material compatibility for aggressive chemical environments to avoid degradation of the glass or O-ring.
- Screw tightening: Do not overtighten screws to avoid damaging the sample or the glass cell.
Install the flat sheet sample and seal it against the O-ring by tightening the four screws. Apply copper tape to the sample for electrical connection before filling the cell with electrolyte.
Required Equipment: Coating Corrosion Test Cell
- Position sample
Position the flat sheet sample over the O-ring at the cell bottom. - Tighten screws
Tighten the four screws evenly to compress the sample against the O-ring. - Apply copper tape
Adhere a strip of copper tape to the exposed surface of the sample for electrical connection.
Does the single-layer ATOMFAIR coating corrosion test cell include a thermostatic water bath for temperature control?
No, the single-layer version does not include a thermostatic water bath jacket. Only the double-layer version incorporates an integrated water bath for precise temperature control during experiments. The single-layer design is intended for room-temperature or uncontrolled ambient conditions, as described in the product family overview.
Is the ATOMFAIR single-layer test cell compatible with non-flat or irregularly shaped working electrodes?
No, this cell is specifically designed for flat sheet working electrode applications. The sample is sealed against an O-ring by a four-screw compression mechanism, which requires a flat, uniform surface to achieve a reliable seal. The cell bottom features a fixed-area circular opening (standard 1 cm²) that works only with flat sheets.
What electrical connection method is used and what maintenance is required for reliable conductivity?
The cell uses copper tape adhered directly to the sample for electrical connection to the working electrode. The tape is designed for easy application and simple replacement after corrosion experiments. To maintain optimal conductivity, the manufacturer recommends replacing the copper tape after each use, as stated in the important notice.
The ATOMFAIR Single-Layer Coating Corrosion Test Cell is a high-borosilicate glass electrochemical cell designed for flat sheet working electrodes, featuring tool-free sample mounting, four-screw compression sealing, and copper tape electrical connection. Its fixed-area circular opening (1 cm² standard) and O-ring seal enable reliable corrosion testing and SEM-ready sample preparation, with capacities from 30 to 250 mL.
Positive
- SEM-ready sample preparation: The cell is specifically designed for electrochemical treatment prior to scanning electron microscopy (SEM) analysis, enabling direct sample transfer without additional preparation steps.
- Tool-free flat sheet installation: Samples are mounted without tools via four-screw compression, allowing easy removal and surface treatment access while maintaining uniform O-ring sealing pressure.
Trade-offs
- O-ring sealing maintenance required: Proper O-ring sealing must be verified before each experiment to prevent electrolyte leakage and ensure reliable contact between the sample and the fixed-area opening.
- Copper tape replacement after each use: The copper tape used for electrical connection to the working electrode must be replaced after each experiment to maintain optimal conductivity and avoid corrosion-related signal degradation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
