ATOMFAIR® EB100G-0.001G-02 HIGH-PRECISION ELECTRONIC BALANCELABORATORY GRADE METROLOGY INTERFACE
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The balance requires a stable environment free from drafts and thermal gradients to achieve milligram-level accuracy. The internal calibration routine must be performed prior to each measurement session to maintain repeatability and linearity specifications.
- Environmental Sensitivity: Locate the balance away from HVAC outlets, windows, and heat sources to prevent airflow interference and thermal drift.
- Draft Shield Requirement: Ensure the glass draft shield is fully sealed before initiating any weighing operation to protect against parasitic air currents.
- Calibration Protocol: Execute the internal calibration procedure to compensate for environmental changes and maintain ±1 mg repeatability.
- Power Supply Compatibility: Use either AC mains or DC battery power as specified; the dual-source configuration ensures operational flexibility.
- Data Connectivity: Connect the RS232 serial port for data streaming; verify proper cable shielding to avoid signal interference.
This procedure outlines the steps to set up and operate the balance for accurate milligram-level measurements. Follow the placement, calibration, and sealing steps to ensure reliable readings.
- Position the balance
Position the balance on a stable, level surface away from HVAC outlets and heat sources. - Seal the draft shield
Seal the integrated draft shield completely before initiating any weighing operation. - Perform internal calibration
Initiate the internal calibration routine to verify repeatability and linearity. - Tare the weighing pan
Tare the weighing pan to zero using the tare function before adding the sample. - Record the measurement
Record the weight measurement from the backlit LCD display after stabilization.
What is the practical impact of the ±1 mg repeatability and ±2 mg linearity on quantitative validation workflows using the EB100G-0.001G-02 balance?
The ±1 mg repeatability and ±2 mg linearity ensure that repeated measurements of the same mass stay within 1 mg and that the displayed value deviates no more than 2 mg from the true value across the 100 g range. This meets requirements for milligram-level analytical weighing and baseline quantitative validation as stated in the application scope.
How does the RS232 interface and dual-source power configuration support integration into automated data acquisition systems?
The balance includes a standard integrated RS232 serial port for direct data output to external devices, and its dual-source power supply (AC/DC matrix compatible) allows operation from both grid power and internal DC battery. This enables flexible placement in automated workflows without dedicated power infrastructure.
What environmental conditions must be controlled to maintain the 1 mg readability when using the integrated draft shield?
The draft shield must be fully sealed prior to data streaming to protect against parasitic airflow. The balance should not be located near HVAC outlets or thermal generation vectors to guarantee validation integrity, as stated in the operational notice. The draft shield is a standardized structural configuration to safeguard milligram readings.
The ATOMFAIR® EB100G-0.001G-02 precision balance provides 100 g capacity at 1 mg readability, featuring internal calibration, a glass draft shield, and RS232 output, suitable for milligram-level analytical weighing and baseline quantitative validation in research environments.
Positive
- Integrated Glass Draft Shield: The built-in draft shield isolates the weighing chamber from parasitic airflow, stabilizing milligram-level readings under typical lab conditions.
- Internal Calibration and RS232 Interface: Internal calibration eliminates the need for external mass standards, while the RS232 port enables direct data transfer to external systems for automated tracking.
Trade-offs
- Environmental Sensitivity: The 1 mg readability requires the draft shield to be fully sealed and the balance placed away from HVAC outlets and thermal sources to prevent measurement degradation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
