ATOMFAIR® EB210G-0.1MG-02 ELECTRONIC ANALYTICAL BALANCERESEARCH GRADE METROLOGY
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED METROLOGY FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This balance requires a regulated operating environment of 18°C–23°C and 20–80%RH to achieve specified 0.1 mg readability. An initial warm-up of 30–60 minutes is mandatory before verification to stabilize the electromagnetic sensor.
- Temperature Constraint: Operate the balance within 18°C–23°C to maintain metrology accuracy.
- Humidity Constraint: Maintain relative humidity between 20% and 80% non-condensing.
- Warm-up Requirement: Allow the balance to warm up for 30 to 60 minutes after powering on.
- Stabilization Time: Allow up to 2.5 seconds for readings to stabilize after placing a sample.
- Auto-calibration Trigger: The balance automatically recalibrates when ambient temperature fluctuates more than 1.5°C or every two hours.
Follow these steps to prepare the balance for accurate weighing in a controlled laboratory environment. Proper warm-up and environmental conditioning are critical for achieving 0.1 mg readability.
Required Equipment: ATOMFAIR EB210G-0.1MG-02 Electronic Analytical Balance
- Verify Ambient Conditions
Confirm that the ambient temperature is between 18°C and 23°C and relative humidity is between 20% and 80%. - Power On the Balance
Power on the balance by connecting it to the specified 220VAC/12V DC power supply. - Allow Warm-up and Calibration
Allow the balance to warm up and internally calibrate for 30 to 60 minutes before any verification or measurement.
What is the required warm-up duration and ambient temperature range for the EB210G-0.1MG-02 to achieve 0.1 mg readability?
The balance requires an initial warm-up of 30 to 60 minutes within a regulated ambient temperature of 18°C to 23°C and humidity of 20% to 80% RH to stabilize the electromagnetic force restoration sensor before verification. This preconditioning ensures the stated ±0.2 mg linearity and ≤2.5 s stabilization time are met.
Does the EB210G-0.1MG-02 support integration with laboratory information management systems or external data logging?
Yes, the balance includes a standard RS232 communication interface for bidirectional data synchronicity with peripherals, PCs, and third-party LIMS environments. This enables direct transfer of measurement data without manual transcription.
How does the auto-calibration feature on the EB210G-0.1MG-02 compensate for ambient thermal drift?
The advanced intelligent auto-calibration triggers a fully automated alignment tracking loop when ambient temperature fluctuations exceed 1.5°C or every 2 hours, eliminating linearity errors caused by thermal drift. This ensures the ±0.2 mg linearity specification is maintained without operator intervention.
The ATOMFAIR EB210G-0.1MG-02 analytical balance offers 210 g capacity with 0.1 mg readability and ±0.2 mg linearity, utilizing a rear-mounted electromagnetic force restoration sensor and vibration-isolated split design for drift-free, interference-free weighing in regulated laboratory environments.
Positive
- Rear-Mounted Electromagnetic Force Restoration: The balance uses an electromagnetic force restoration sensor that provides high precision, rapid response, and drift-free mass detection kinetics, ensuring reliable measurements for micro-powder tracking and fluid fraction control.
- Vibration-Isolated Split Design: The split-body architecture decouples the LED panel from the weighing mechanism, eliminating keystroke kinetic interference and maintaining measurement integrity during operation.
Trade-offs
- Extended Warm-Up Requirement: The balance requires a 30–60 minute warm-up period after power-on within the 18°C–23°C thermal zone to achieve uncompromised 0.1 mg metrology performance, which must be factored into laboratory workflow scheduling.
- Regulated Environmental Conditions: Optimal operation demands a controlled ambient temperature of 18°C–23°C and non-condensing humidity of 20%–80%RH; deviations may affect linearity and repeatability, requiring environmental monitoring infrastructure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
