|
Tungsten Evaporation Boat, Straight Type, Flat Tub, 0.2 x 15 x 100 mm
Product Type: Evaporation Boat
Research-grade laboratory product
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation boat is designed for vacuum deposition use and must be operated within its electrical and thermal ratings. Correct mating with the source holder and power supply is required before use.
- Vacuum environment requirement: Operate the boat only inside a vacuum chamber to prevent oxidation and ensure proper evaporation.
- Electrical compatibility: Match the voltage, current, and power ratings to the resistive-heating power supply to prevent damage.
- Thermal limit: Do not exceed the maximum temperature rating of 1200 °C to avoid material failure.
- Geometric compatibility: Confirm that the boat dimensions and tub geometry align with the evaporation source holder before installation.
Follow these steps to safely mount and energize the evaporation boat in a vacuum deposition system. Verify compatibility before applying power.
Required Equipment: Vacuum evaporation system, Resistive-heating power supply, Source holder
- Verify compatibility
Verify the boat's dimensions and tub geometry match the evaporation source holder. - Mount the boat
Mount the boat securely into the source holder, ensuring proper contact. - Connect power supply
Connect the boat's terminals to the resistive-heating power supply. - Load evaporation material
Load the evaporation material into the tub, ensuring it does not overflow. - Evacuate the chamber
Evacuate the vacuum chamber to the required process pressure. - Apply power gradually
Apply power gradually while monitoring the boat temperature. - Maintain temperature limit
Maintain the temperature below the 1200 °C maximum during operation.
What are the electrical power requirements for the Atomfair AF-EBWB-S02015X100T40D29C10FL tungsten evaporation boat, and how do the voltage and current ratings affect compatibility with resistive-heating power supplies?
The boat is rated at 1.47 V, 204 A, and 300 W. These values must be matched to the power supply's output capabilities to ensure proper resistive heating. The specified dimensions (0.2 mm thickness, 15 mm width, 100 mm length) determine the resistance, so using a power supply that can deliver at least 204 A at 1.47 V is critical for achieving the 1200 °C maximum temperature.
How do I confirm that the straight-type flat tub geometry and 1 cc tub capacity of this tungsten evaporation boat are compatible with my existing evaporation source holder and source material volume?
The boat has a tub length of 40 mm, depth of 2.9 mm, and capacity of 1 cc. You must verify that your source holder accepts a straight-type boat with overall dimensions 0.2 x 15 x 100 mm and that the tub geometry (flat tub with heat choke) matches the holder's clamping or contact design. The 1 cc capacity should accommodate your source material charge without overfilling.
What are the handling and installation considerations for the 0.2 mm thick tungsten evaporation boat to avoid damage during mounting?
The boat is only 0.2 mm thick, making it mechanically delicate. Handle with care to avoid bending or cracking, especially at the thin tub region. Ensure clean, flat contact surfaces on the power supply electrodes to prevent arcing or uneven heating. The maximum operating temperature of 1200 °C should not be exceeded to avoid structural failure.
This tungsten evaporation boat features a straight geometry with flat tub and heat choke, offering 1 cc capacity and 1200°C maximum temperature for resistive-heating vacuum deposition. Dimensional and electrical specifications must be matched to the source holder and power supply.
Positive
- Tungsten construction for high-temp stability: Tungsten material is selected for resistive-heating evaporation sources, providing reliable performance at maximum temperatures up to 1200°C in vacuum environments.
- Defined geometry for integration: Precise overall dimensions (0.2×15×100 mm) and tub geometry (40 mm length, 2.9 mm depth, 1 cc capacity) support dimensional matching with evaporation source holders.
Trade-offs
- Requires power supply matching: Voltage (1.47 V), current (204 A), and power (300 W) must be verified against the available resistive-heating power supply to avoid electrical mismatch.
- Dimensional compatibility must be confirmed: Boat material, overall dimensions, tub geometry, and tub capacity must be checked against the specific evaporation source holder before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
