|
Tungsten Evaporation Boat, Straight Type, V Tub, 0.15 x 10 x 100 mm
Product Type: Evaporation Boat
Research-grade laboratory product
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The tungsten evaporation boat requires precise electrical matching and temperature monitoring to prevent resistive-heating failure or material degradation. The boat's geometry and dimensions must be verified against the source holder before installation.
- Electrical rating constraint: The boat's electrical rating (4.96 V, 136 A, 675 W) must be matched by the power supply to avoid damage.
- Maximum temperature limit: Operate at or below 1800 °C to prevent structural failure of the tungsten material.
- Geometric compatibility: Confirm that the boat dimensions (0.15 x 10 x 100 mm) and tub capacity (0.4 cc) fit the evaporation source holder.
- Tub geometry confirmation: Verify that the V tub configuration matches the source loading design.
Configure the evaporation boat by verifying compatibility with the source holder and power supply before installation. Ensure correct electrical matching and mechanical fit to avoid operational hazards.
- Confirm material match
Confirm that the boat material (tungsten) is compatible with the evaporation source holder requirements. - Verify dimensions
Verify that the overall dimensions (0.15 x 10 x 100 mm) fit the source holder without interference. - Check tub geometry and capacity
Check the tub geometry (straight type, V tub) and tub capacity (0.4 cc) against the source loading volume. - Match electrical rating
Match the electrical rating (4.96 V, 136 A, 675 W) with the resistive-heating power supply specifications.
What are the electrical rating constraints when integrating this tungsten evaporation boat with a resistive-heating power supply?
The boat is rated at 4.96 V, 136 A, and 675 W. These values must be matched to the power supply's output capability to avoid under- or over-powering the boat. The 0.15 mm thickness and 100 mm length directly influence resistance, so the voltage and current limits are specific to this geometry and should not be exceeded.
Which evaporation source holder geometries are compatible with this straight-type V-tub tungsten boat?
Compatibility requires matching the boat's overall dimensions (0.15 x 10 x 100 mm), tub length (50 mm), tub depth (2.1 mm), and tub capacity (0.4 cc) to the source holder's clamping and cavity specifications. The straight-type geometry and V-tub configuration are critical; confirm these parameters against the holder before ordering.
What handling and storage precautions are needed for this 0.15 mm thick tungsten evaporation boat?
The boat is only 0.15 mm thick, making it mechanically fragile. Handle with clean, non-abrasive tools to avoid deformation or contamination. Store in a dry, inert environment to prevent oxidation before use. The maximum operating temperature of 1800 °C requires gradual heating to avoid thermal shock.
This tungsten evaporation boat (0.15×10×100 mm, V tub, 0.4 cc capacity) is rated to 1800°C and requires precise electrical matching (4.96 V, 136 A, 675 W) with the power supply, with a minimum order of 5 pieces.
Positive
- High-temperature tungsten construction: Tungsten material supports resistive heating up to 1800 °C, suitable for demanding evaporation processes requiring elevated source temperatures.
- Precise geometry and tub capacity: Defined 0.15 mm thickness, 10 mm width, 100 mm length, and 0.4 cc V-tub capacity enable accurate source loading and dimensional matching with evaporation source holders.
Trade-offs
- Electrical rating must match power supply: The boat requires a power supply delivering 4.96 V, 136 A, and 675 W; pre-order verification of compatibility is mandatory to avoid operational mismatch.
- Minimum order quantity of 5 pieces: MOQ is 5 pcs, with package options of 5 or 10 pieces, which may constrain small-scale R&D labs needing single-unit evaluation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
