|
Tungsten Evaporation Boat, Straight Type, V Tub, 0.1 x 10 x 100 mm
Product Type: Evaporation Boat
Research-grade laboratory product
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Defines the operational constraints for the ATOMFAIR tungsten evaporation boat, model AF-EBWB-S01010X100T50D20C04VT, before and during resistive-heating service. This document applies to source-holder integration, power-supply matching, and temperature-limited operation in vacuum evaporation.
- Maximum temperature limit: Do not exceed the 1800 °C maximum temperature rating during evaporation processing.
- Electrical supply matching: Confirm the power supply can deliver the rated 4.96 V, 136 A, and 675 W electrical configuration before energizing the boat.
- Source holder compatibility: Verify that the boat material, overall dimensions, V-tub geometry, and tub capacity match the selected evaporation source holder before installation.
- Evaporation environment: Operate the boat only in a vacuum evaporation system configured for resistive-heating source loading.
This procedure covers pre-installation verification, mounting, and initial resistive-heating startup for the tungsten evaporation boat. It is intended for engineers preparing the boat for vacuum evaporation without exceeding its rated electrical or thermal limits.
Required Equipment: Evaporation source holder, Resistive-heating power supply, Vacuum evaporation system
- Verify source-holder compatibility
Confirm the boat material, overall dimensions, V-tub geometry, and tub capacity match the evaporation source holder before installation. - Match the power supply
Verify that the power supply is configured to deliver the rated 4.96 V, 136 A, and 675 W electrical values before connecting the boat. - Mount the boat
Mount the boat in the evaporation source holder with the V tub oriented upward for source loading. - Load the source material
Load the evaporation source material into the 0.4 cc V tub without exceeding the tub capacity. - Energize under vacuum
Energize the boat only after the vacuum chamber is sealed and evacuated for resistive-heating operation. - Monitor operating limits
Monitor electrical readings and boat temperature to stay within the rated 675 W and 1800 °C limits during operation.
What are the electrical requirements for this tungsten evaporation boat and how do they affect process compatibility?
The boat requires 4.96 V, 136 A, and 675 W. These values must be matched with the resistive-heating power supply before ordering. The maximum temperature rating of 1800 °C supports temperature-limit matching with the selected evaporation process.
How do the tub dimensions and geometry of this evaporation boat affect compatibility with standard evaporation source holders?
The boat has overall dimensions of 0.1 mm thickness, 10 mm width, and 100 mm length, with a V tub geometry featuring a 50 mm tub length, 2 mm depth, and 0.4 cc capacity. These specifications must be confirmed against the selected evaporation source holder to ensure proper fit and source loading volume.
What handling precautions are necessary for the 0.1 mm thick tungsten evaporation boat to avoid damage during installation?
The boat is made of tungsten with a thickness of 0.1 mm, making it delicate. Careful handling is required to avoid bending or deformation. The product is supplied in packages of 5 or 10 pieces, and the minimum order quantity is 5 pcs.
This tungsten evaporation boat, straight-type V tub geometry (0.1 x 10 x 100 mm), is specified for resistive-heating vacuum deposition with a 0.4 cc tub capacity, 1800°C maximum temperature, and electrical ratings of 4.96 V, 136 A, and 675 W. Its performance depends on precise dimensional and electrical matching to the evaporation source holder and power supply.
Positive
- Tungsten high-temperature stability: Tungsten construction supports resistive-heating evaporation at up to 1800°C, matching the thermal requirements of common deposition processes.
- Precise geometry for reproducible loading: Defined dimensions (0.1 mm thickness, 10 mm width, 100 mm length) and V tub with 0.4 cc capacity enable consistent source material volume and dimensional fit before installation.
Trade-offs
- Requires electrical supply matching: Voltage (4.96 V), current (136 A), and power (675 W) ratings must be verified against the resistive-heating power supply; mismatch can cause inadequate heating or damage.
- Limited evaporation material capacity: The 0.4 cc tub volume restricts the amount of source material that can be loaded per run, potentially requiring frequent refills for thicker depositions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
