SpinRotor A 12 2 P 12-Place Microtube RotorProduct Type: Centrifuge Rotor
Research-grade laboratory product
|
|||||||||||||||||||
|
|||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, platform compatibility or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The rotor must be matched to the centrifuge model, tube geometry, and rated-speed requirements. Operating speed, RCF, temperature, and sample-container format must be verified against the intended separation method before use.
- Centrifuge Model Compatibility: Confirm that the rotor mounting interface and maximum speed rating are compatible with the specific centrifuge model.
- Tube Format and Size: Verify that the rotor accommodates the required tube geometry, size, and number of tubes (12-place microtube format).
- Operating Parameters: Check that the required speed, RCF, temperature, and sample container type are within the rotor's specified limits.
Three verification steps ensure the rotor is correctly matched to the centrifuge and protocol. Perform these checks before each use to prevent operational errors and equipment damage.
- Confirm Centrifuge Model
Confirm that the centrifuge model matches the rotor's mounting interface and maximum speed rating. - Verify Tube Compatibility
Verify that the selected tube size and format are compatible with the rotor's tube slots and retainers. - Check Operating Parameters
Check that the required operating speed, RCF, temperature, and sample container type are within the rotor's specifications.
What is the trade-off between using a 12-place microtube rotor versus a higher-capacity rotor on the SpinCore 2012 Plus?
The 12-place format balances manageable batch size and easier loading, but the actual separation performance depends on tube size and rated speed, which must be confirmed for the specific workflow. The description does not specify maximum RCF; users should verify the rotor's speed rating against the centrifuge manual to assess the trade-off between throughput and g-force.
Which centrifuge models and tube sizes are compatible with the SpinRotor A 12 2 P?
This rotor is specifically compatible with the SpinCore 2012 Plus centrifuge. It is designed for microtubes, but the exact tube size (e.g., 0.5 mL, 1.5 mL, or 2.0 mL) must be confirmed before ordering, as adapters may be required. Always verify tube geometry and rated speed to ensure a proper match.
What safety precautions should be taken when installing and operating this microtube rotor?
Before operation, confirm that the rotor is properly seated on the SpinCore 2012 Plus drive, tubes are symmetrically loaded with equal mass, and the set speed does not exceed the rotor's maximum rated speed. The product documentation stresses confirming the centrifuge model, tube size, and rated speed before use to prevent imbalance failure.
The SpinRotor A 12 2 P 12-Place Microtube Rotor provides a dedicated 12-tube capacity for microtube separation workflows when used with the SpinCore 2012 Plus centrifuge, but requires explicit pre-order confirmation of centrifuge model, tube geometry, and rated speed to ensure safe and effective operation.
Positive
- 12-place microtube format: The rotor supports twelve microtubes simultaneously, providing parallel processing for small-volume sample preparation and separation protocols.
- SpinCore 2012 Plus compatibility: Designed to mount directly to the SpinCore 2012 Plus centrifuge, reducing interface uncertainty and simplifying configuration matching for established lab setups.
Trade-offs
- Mandatory pre-order compatibility check: The ordering note requires confirmation of centrifuge model, tube size, and rated speed before purchase, adding a verification step that may delay procurement.
- Unspecified speed and RCF ratings: Maximum rotational speed and relative centrifugal force are not provided in the product documentation, requiring users to obtain these parameters from the manufacturer or test data prior to method validation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
