Description
51.2V LFP Low-Temperature Stackable Energy Storage Battery System for Home Use (21 kWh) | ATOMFAIRCOMMERCIAL GRADE PRODUCTION
|
|||||||||||||||||||||||||||||||
|
This battery system requires strict adherence to voltage and temperature limits to prevent thermal runaway. Storage and operation must avoid short circuits, physical damage, and exposure to incompatible charging equipment.
- Operating Temperature Range: Operate the battery system within the ambient temperature range of -35°C to 60°C to ensure safe and stable performance.
- Voltage Limits: Charge cut-off voltage is 58.4 V and discharge cut-off voltage is 40 V; exceeding these thresholds may cause damage or safety hazards.
- Charging Equipment Compatibility: Only use compatible LFP charging equipment with the correct voltage settings to avoid overcharging or undercharging.
- Prohibited Actions: Do not disassemble, short-circuit, or incinerate the battery pack, as these actions can lead to fire, explosion, or toxic release.
- End-of-Life Disposal: Dispose of end-of-life batteries according to local regulations to prevent environmental contamination.
Follow these steps to safely initialize and operate the battery system. Adherence to voltage, temperature, and handling guidelines is critical for preventing hazards.
Required Equipment: Compatible LFP charging equipment
- Verify Environmental Conditions
Confirm the operating environment is within the temperature range of -35°C to 60°C before installation or use. - Check Charging Equipment
Verify that the charging equipment is compatible with LFP chemistry and set to the correct voltage limits (charge cutoff 58.4 V, discharge cutoff 40 V). - Avoid Prohibited Actions
Ensure the battery pack is not disassembled, short-circuited, or incinerated during handling or operation. - Respond to Abnormalities
If any abnormality is detected, disconnect the battery system immediately and contact qualified service personnel. - Dispose at End-of-Life
Dispose of the battery system at end-of-life in accordance with local regulations for lithium-ion batteries.
What is the maximum continuous power capability of the 21 kWh LFP battery system based on its 52 A rated current, and how does this power limit its use for high-draw home applications?
The maximum continuous power output is approximately 2.66 kW, calculated from the 51.2 V nominal voltage and 52 A rated current. This limits continuous operation to loads at or below 2.66 kW, meaning simultaneous high-draw appliances such as electric ovens or central air conditioning units would exceed this rating. The system is designed for typical household consumption and backup power, not for sustained high-load applications without additional parallel modules or grid support.
Does the 51.2V LFP battery system require a specific type of inverter or charge controller for integration with solar PV systems?
Yes, the battery requires compatible LFP charging equipment set to the correct voltage parameters: a charge cutoff of 58.4 V and a discharge cutoff of 40 V. The system supports seamless connection with solar photovoltaic systems, but the inverter or charge controller must be capable of operating within this voltage window and be configured for LFP chemistry. The integrated BMS provides real-time monitoring and protection to ensure safe and efficient energy flow during solar charging and discharging.
What are the key safety and handling considerations for installing this 21 kWh LFP battery system in a residential setting, given its weight and chemistry?
At 249 ± 5 kg with dimensions of 760 × 263 × 1636 mm, the system requires a structurally reinforced floor and careful handling during installation to avoid injury or damage. The LFP chemistry provides excellent thermal stability, but operation must be confined to -35°C to 60°C. Only compatible LFP chargers set to a charge cutoff of 58.4 V and discharge cutoff of 40 V should be used. The battery must not be disassembled, short-circuited, or incinerated; any abnormality requires immediate disconnection and service by qualified personnel. End-of-life disposal must follow local regulations.
This 21 kWh LFP battery system delivers reliable energy storage across a wide temperature range (-35°C to 60°C) and supports modular expansion, though its 249 kg weight and need for compatible charging infrastructure with precise voltage limits are key installation factors.
Positive
- Wide operating temperature range: Operates from -35°C to 60°C, ensuring stable performance in extreme climates for residential energy storage.
- Stackable modular design: Compact footprint with flexible stacking allows scalable capacity expansion and simplified maintenance.
Trade-offs
- High system weight: At 249 ± 5 kg, the battery requires reinforced flooring and mechanical handling equipment for safe installation.
- Specific charging requirements: Requires compatible LFP charging equipment with exact voltage settings (charge cutoff 58.4 V, discharge cutoff 40 V) to prevent damage or safety issues.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
