51.2V 206Ah LFP Battery System for Tow Tractors (10.5 kWh) | ATOMFAIRCOMMERCIAL GRADE PRODUCTION
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This battery system requires strict adherence to environmental and electrical limits to prevent thermal runaway or damage. The pack must be operated within -35°C to 60°C, with connectors sealed to maintain IP65 protection, and must never be short-circuited, disassembled, or incinerated.
- Temperature Range: Operate the battery only within the ambient temperature range of -35°C to 60°C to avoid performance degradation or safety hazards.
- Electrical Safety: Use only compatible LFP charging equipment and never short-circuit, disassemble, or deform the battery pack.
- Enclosure Integrity: Ensure all connectors are securely sealed to maintain the IP65 protection rating against dust and water jets.
- Disposal: Dispose of end-of-life batteries according to local regulations to prevent environmental contamination.
Follow these steps to initialize and safely operate the battery system in tow tractor applications. Proper handling ensures optimal performance and mitigates electrical and thermal risks.
Required Equipment: Compatible LFP charging equipment
- Verify Ambient Temperature
Verify the operating environment temperature is within the specified range of -35°C to 60°C before deploying the battery. - Connect to Compatible Charger
Connect the battery system to a compatible LFP charging unit only. - Seal Connectors
Confirm that all electrical connectors are securely sealed to maintain the IP65 protection rating. - Monitor for Abnormalities
In case of any abnormality such as swelling, leakage, or overheating, immediately disconnect the battery and contact qualified service personnel.
What is the recommended state of charge operating range for the ATOMFAIR 51.2V 206Ah LFP battery to optimize cycle life?
The recommended SOC operating range is 5% to 95%, with a corresponding voltage range of 40 to 58.4 V. Operating within this window helps maximize the cycle life of the LFP chemistry by avoiding deep discharge and overcharge stress.
Can the ATOMFAIR 51.2V 206Ah LFP battery system be integrated into tow tractors designed for 48V or 51.2V nominal systems?
Yes, the battery has a rated voltage of 51.2 V and a voltage range of 40 to 58.4 V, making it compatible with tow tractors and material handling equipment designed for 48–51.2 V nominal systems. The 1P16S configuration and 206 A rated charge/discharge current support typical power demands of such vehicles.
What are the infrastructure and environmental requirements for installing the ATOMFAIR 51.2V 206Ah LFP battery in a tow tractor?
The battery requires natural cooling, so no active thermal management system is needed. It operates from -35°C to 60°C and has an IP65 protection level, meaning it is dust-tight and protected against water jets, suitable for daily wash-downs and dusty industrial environments. The unit weighs 102 ± 4 kg (dimensions 567 × 396 × 338 mm) and must be mounted securely. All connectors must be sealed to maintain the IP65 rating.
The ATOMFAIR 51.2V 206Ah LFP battery system delivers 10.5 kWh of rated energy with IP65 ingress protection and a wide -35°C to 60°C operating range, enabling reliable tow tractor operation in cold storage and outdoor logistics yards. The system requires dedicated LFP charging equipment and optimal performance depends on maintaining the recommended 5%–95% state-of-charge window.
Positive
- Wide Operating Temperature Range: Operates from -35°C to 60°C, ensuring consistent power delivery in cold storage warehouses and outdoor logistics yards without additional heating or cooling infrastructure.
- IP65 Protection Rating: Fully dust-tight and protected against water jets, making the battery suitable for daily industrial wash-downs and dusty warehouse environments without enclosure modifications.
Trade-offs
- Requires Compatible LFP Charger: Only dedicated LFP charging equipment must be used; standard lead-acid or other chemistry chargers are incompatible and may damage the pack or reduce safety margins.
- Optimal SOC Window Constraint: The recommended state-of-charge operating range is 5% to 95%; repeated operation outside this window can accelerate capacity fade and reduce cycle life.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
