Description
LFP Low-Temperature Battery Pack for Mining Trucks (209.664 kWh / 748.8V) | ATOMFAIRCOMMERCIAL GRADE PRODUCTION
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This battery pack requires strict adherence to operating temperature limits and cooling system maintenance to prevent thermal runaway. The IP67 enclosure must remain sealed to protect against moisture and dust ingress; any breach or unauthorized modification voids safety certifications.
- Temperature Constraint: Operate the battery pack exclusively within the ambient temperature range of -35°C to 60°C to avoid accelerated degradation or failure.
- Cooling System Integrity: Maintain the dual-channel liquid cooling system with proper coolant levels and verify no leaks before each deployment.
- Electrical Safety: Use only compatible LFP charging equipment rated for 748.8V nominal; never short-circuit or allow reverse polarity connection.
- Mechanical Integrity: Do not disassemble, deform, or incinerate the pack; any physical damage may lead to internal short circuits and fire.
- End-of-Life Handling: Dispose of the battery pack according to local hazardous waste regulations for large-format lithium-ion systems.
This procedure outlines the initial setup and safe operation of the high-voltage battery pack for mining truck applications. Follow these steps to ensure proper thermal management and electrical safety.
Required Equipment: LFP charging equipment
- Verify Ambient Temperature
Verify the ambient temperature is within the -35°C to 60°C operating range before starting the system. - Inspect Cooling System
Inspect the liquid cooling system for proper coolant level and leak-free connections. - Seal Connectors
Seal all high-voltage connectors and ensure the IP67-rated enclosure is firmly closed. - Connect Charger
Connect the battery pack to a compatible LFP charger rated for 748.8V nominal voltage. - Monitor for Abnormalities
Disconnect the battery immediately if any abnormal voltage, temperature, or leakage is detected.
Does the 1470 kg weight of the 209.664 kWh LFP battery pack impose a significant payload penalty for 220-tonne mining truck retrofits, and how does its energy density trade off against safety and durability?
The battery pack weighs 1470±50 kg and delivers 209.664 kWh. While the specific energy is not explicitly stated, the product description emphasizes that LFP chemistry provides excellent thermal stability, enhanced safety, and extended service life, making it suitable for extreme mining environments (-35°C to 60°C). The weight trade-off is accepted in favor of robust safety and long cycle life over higher-density chemistries.
What voltage and physical interface requirements must be met for integrating this 748.8V battery pack into a 220-tonne mining truck's existing electrical architecture?
The battery pack has a rated voltage of 748.8V and dimensions of 3642 x 1160 x 249 mm. It requires compatible LFP charging equipment, as noted in the product notice. However, the product description does not specify electrical interface standards (e.g., connector type or communication protocol). For integration details, users should contact Atomfair engineering to ensure compatibility with the truck's existing power system.
What specific steps are required to maintain the IP67 rating and dual-channel liquid cooling system during continuous operation in dusty mining environments?
To maintain IP67 protection, all connectors must be securely sealed and the enclosure kept intact. The dual-channel liquid cooling system requires proper maintenance to ensure coolant levels are correct and channels are free of debris, as indicated in the product's operational notice. The battery must be operated within -35°C to 60°C, and users should avoid disassembly, deformation, short-circuiting, or incineration. These steps preserve the IP67 rating and thermal management integrity.
This LFP battery pack delivers 209.664 kWh at 748.8 V with a wide -35°C to 60°C operating range and dual-channel liquid cooling for thermal management, but its 1470 kg mass and required cooling system maintenance impose significant installation and operational constraints.
Positive
- Wide Operating Temperature Range: The battery pack operates reliably from -35°C to 60°C, enabling deployment in extreme mining environments without performance degradation.
- LFP Chemistry with Dual-Channel Liquid Cooling: Lithium Iron Phosphate chemistry provides excellent thermal stability and safety, while the dual-channel liquid cooling system maintains optimal temperature under high-load conditions.
Trade-offs
- Heavy Weight and Large Footprint: At 1470 kg and dimensions of 3642 x 1160 x 249 mm, the pack requires robust mounting infrastructure and specialized handling equipment for installation.
- Liquid Cooling System Maintenance Required: The dual-channel liquid cooling system must be regularly maintained and all connectors kept sealed to preserve IP67 protection, necessitating trained personnel.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
