Description
High-Energy-Density Power-Type Semi-Solid Battery – Long Range Series | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||||||||||||||
Store cells in a dry, temperature-controlled environment between -40°C and 60°C. Always use a BMS with overcurrent and low-temperature protection; pre-condition at 25°C before first high-rate discharge.
- Voltage Operating Window: Operate the cell strictly within 2.75V to 4.2V to prevent over-discharge or overcharge damage.
- Temperature Limits: Avoid sustained exposure above 60°C during discharge to prevent accelerated degradation.
- BMS Requirement: Integrate a battery management system with overcurrent and low-temperature protection for safe operation.
- Pre-conditioning: Pre-condition cells at 25°C before the first high-rate discharge to ensure optimal performance.
- Packaging Integrity: Maintain moisture-barrier vacuum-sealed packaging until use to prevent electrolyte degradation.
Follow these steps to safely prepare and connect the semi-solid battery cells for first use. Proper pre-conditioning and BMS integration are critical for safety and cycle life.
Required Equipment: Battery Management System (BMS) with overcurrent and low-temperature protection, Temperature-controlled environment (25°C pre-conditioning chamber)
- Inspect Packaging
Inspect the moisture-barrier vacuum-sealed bag for any damage or punctures before opening. - Verify Voltage
Measure the open-circuit voltage of each cell to confirm it is within the 2.75V–4.2V range. - Pre-condition Cells
Place cells in a 25°C environment for at least 2 hours before the first high-rate discharge. - Connect BMS
Connect each cell to a BMS with overcurrent and low-temperature protection according to the manufacturer's wiring diagram. - Set Operating Limits
Configure the BMS to enforce a discharge cutoff at 2.75V and charge cutoff at 4.2V.
How does the 320–370 Wh/kg energy density of the ATOMFAIR Long Range Series cells affect their sustained high-rate discharge cycle life?
The cells deliver 320–370 Wh/kg while supporting 5C continuous and 7C pulse discharge (3 min), but the declared cycle life of ≥800 cycles to 80% SOH is based on 1C/1C conditions per the specification. Sustained high-rate discharge may reduce cycle life, though the semi-solid electrolyte design and low internal resistance help mitigate degradation. Always operate within 2.75V–4.2V and use a BMS with overcurrent protection for prolonged high-power operation.
What are the critical voltage and thermal constraints for integrating the AFEPSLR cells into an eVTOL or high-performance EV battery pack?
The cells must be kept within a voltage window of 2.75V–4.2V and the ambient temperature must not exceed 60°C during discharge. A BMS with overcurrent and low-temperature protection is mandatory. For initial high-rate discharge, pre-condition cells at 25°C. The wide operating range of –40°C to 60°C supports extreme environments, but sustained temperatures above 60°C are prohibited. Custom dimensions are available for pack integration.
What storage and handling precautions are required for the semi-solid electrolyte cells in a research or production setting?
The semi-solid electrolyte provides enhanced safety with no leakage and reduced flammability compared to liquid electrolytes. Cells are shipped in moisture-barrier vacuum-sealed aluminum foil bags inside anti-static cartons. Avoid sustained exposure above 60°C and always maintain voltage within the 2.75V–4.2V range. Use proper ESD precautions and a BMS during testing. Custom packaging is available for bulk orders.
The ATOMFAIR Semi-Solid Battery Long Range Series offers ultra-high energy density (320–370 Wh/kg) with semi-solid electrolyte safety and wide temperature tolerance (-40°C to 60°C), but requires strict voltage control (2.75V–4.2V) and a BMS with protection circuits, plus pre-conditioning at 25°C before first high-rate discharge.
Positive
- Ultra-high energy density: 320–370 Wh/kg enables longest runtime and lightweight pack design for demanding applications like eVTOL and high-performance EVs.
- Wide temperature operation: Reliable discharge from -40°C to 60°C with enhanced safety from semi-solid electrolyte, reducing leakage and flammability.
Trade-offs
- Strict voltage and BMS required: Must operate within 2.75V–4.2V and always use a BMS with overcurrent and low-temperature protection to ensure safe operation.
- Temperature and pre-conditioning constraints: Sustained temperature above 60°C must be avoided; cells must be pre-conditioned at 25°C before first high-rate discharge for optimal performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
