Description
72V Step-Through Motive Battery Pack Series (20S1P Pouch Cell Horizontal Grade) | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||
The battery pack requires intelligent BMS balancing to block premature layer degradation. Terminal contacts must remain within designated load limits and charging must use authorized safety parameters.
- BMS Balancing Requirement: Perform systematic intelligent battery management balancing actions to prevent premature layer degradation loops.
- Terminal Contact Limit: Prevent terminal contacts from becoming linked past designated load limits.
- Authorized Charging: Execute charging loops exclusively under authorized safety parameters.
- Swapping Lock Alignment: Ensure swapping lock alignment tolerances line up properly before locking structural handles.
The battery pack requires careful management during installation and charging. Follow these steps to ensure safe operation and prevent degradation.
Required Equipment:
- Perform BMS Balancing
Perform systematic intelligent battery management balancing actions to block premature layer degradation loops. - Inspect Terminal Contacts
Inspect terminal contacts to ensure they are not linked past designated load limits. - Charge with Authorized Parameters
Execute charging loops exclusively under authorized safety parameters. - Align Swapping Lock
Align swapping lock tolerances properly before locking structural handles into the automated cabinet footprint.
What are the dimensional and energy trade-offs between the 35Ah and 50Ah variants of the 72V Step-Through battery pack?
The 35Ah variant delivers 2520 Wh typical energy with dimensions 345×226×175 mm, while the 50Ah variant delivers 3600 Wh with dimensions 350×216×175 mm. The 50Ah offers 43% more energy but is slightly longer and narrower, requiring careful chassis fitment verification to maintain the low center-of-gravity optimization.
How does the 72V Step-Through battery pack integrate with vehicle dashboard and fleet management systems?
The pack natively supports Bluetooth, One-line Dashboard Bus, RS485, and CAN multi-protocol nodes, enabling direct communication with custom vehicle dashboards and cloud-based battery swapping network telemetry for real-time SOC/SOH tracking under continuous high-load operations.
What environmental protection and safety protocols are required for operating the 72V Step-Through battery pack in wet or sub-zero conditions?
The pack is rated IPX7 for immersion protection, suitable for heavy rain and high-humidity swap cabinets. It requires systematic intelligent battery management balancing to prevent premature layer degradation, and swapping lock alignment tolerances must be verified before locking into automated cabinet footprints. The BMS provides high-accuracy SOC/SOH telemetry for sub-zero optimized operation.
The 72V step-through pack integrates a low-profile horizontal pouch cell layout for under-floorboard mounting, delivering over 2500 cycles to 70% capacity. Operational deployment requires systematic BMS balancing and precise mechanical alignment for automated swapping cabinets.
Positive
- Enhanced Cycle Durability: Rated for over 2500 deep discharge cycles to ≥70% capacity limits, drastically optimizing long-term total cost of ownership for urban fleets.
- Low Center-of-Gravity Chassis Optimization: Flat, low-profile horizontal enclosure shifts heavy pack mass beneath the floorboard, improving ride ergonomics and cornering control.
Trade-offs
- Requires Systematic BMS Balancing: The high-capacity pack demands intelligent battery management balancing actions to block premature layer degradation loops, adding firmware and maintenance overhead.
- Swapping Alignment Sensitivity: Mechanical swapping lock alignment tolerances must be precisely matched before locking handles into automated cabinet footprints, increasing installation precision requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
