Description
Atomfair LATP Solid Electrolyte Powder
Technical Specifications
| Model | Ionic Conductivity (mS/cm, 25°C) | Primary Particle D50 | Moisture Content (wt%) |
|---|---|---|---|
| LATP03V1 | 1.32 | 0.30±0.06 μm | ≤0.2 |
| LATP06V1 | – | 0.60±0.10 μm | – |
| LATP10V1 | 0.67 | 1.00±0.20 μm | ≤0.1 |
| LATP50V1 | – | 5.0±1.0 μm | – |
| LATP100V1 | – | 10.0±2.0 μm | – |
Packaging & Storage
| Item | Description |
|---|---|
| Bottled Packaging (<1kg) | 1g (Trial Size), 5g, 10g, 50g, 100g, 500g; Inert gas sealed in glove box (H₂O & O₂ content < 0.1ppm) |
| Bagged Packaging (≥1kg) | Bottled in dry room, moisture-proof and oxidation-proof |
| Storage Conditions | Cool and dry environment; Seal immediately after opening |
Usage Recommendation
It is recommended to vacuum dry at 80°C for 2 hours to remove adsorbed water before use.
Operating Specifications
- Environment Preparation: Glove box filled with high-purity nitrogen/argon (H₂O & O₂ < 0.1ppm), equipment in normal operation, and clean operating table
- Weighing & Proportioning: Weigh with a balance of 0.1mg precision (avoid vibration); store the mixture in a water-free and dust-free container, anti-static
- Sealing Process: Transfer powder using high-purity low oxygen permeability sample bottles/aluminum foil bags, seal with spiral caps with O-rings
Core Advantages
- High Ionic Conductivity: Room-temperature ionic conductivity up to 1.3 mS/cm, reducing battery internal resistance
- Precise Particle Size Control: Primary particle D50 ranges from 0.3~10.0μm, suitable for thin-film coating and thick-layer sintering
- Ultra-Low Moisture Content: Dry packaging ensures H₂O & O₂ content < 0.1ppm, avoiding interfacial side reactions
- Wide pH Adaptability: Material pH 7.3~8.5, compatible with various electrode interfaces
Typical Applications
- Solid-state lithium batteries (replacing liquid electrolytes to improve safety)
- Lithium-air batteries (constructing stable ion transport channels)
- Electrochemical sensors (corrosion-resistant ion-selective membrane material)
- Prototype verification of new electrolyte systems
Contact
For inquiries or customization, contact: inquiry@atomfair.com
