Multi-walled carbon nanotubes dispersion in water, ; 10 wt% (The actual solid; content shall prevail). content, model AF-CNTD-WDM-P1150

$243.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Multi-walled carbon nanotubes dispersion in water, ; 10 wt% (The actual solid; content shall prevail). content is a carbon nanotube dispersion supplied with ; 10 wt% (The actual solid; content shall prevail). content. It is prepared for buyer comparison by model, material form, concentration or dimensional specification before quotation.

Multi-walled carbon nanotubes dispersion in water, ; 10 wt% (The actual solid; content shall prevail). content

Product Type: Carbon nanotube dispersion
Research-grade laboratory product

Product Overview

Multi-walled carbon nanotubes dispersion in water, ; 10 wt% (The actual solid; content shall prevail). content is a carbon nanotube dispersion supplied with ; 10 wt% (The actual solid; content shall prevail). content. It is prepared for buyer comparison by model, material form, concentration or dimensional specification before quotation.

The specification table gives the measurable selection details available for this item, including material form, dimensional range, purity, content, conductivity, solvent or composition when supplied for the selected model.

Use this page to compare nanocarbon specifications before requesting a quotation, especially where functional group, concentration, geometry, package form or availability affects laboratory procurement.

Performance Features

  • Material form: Multi-walled carbon nanotubes dispersion in water identifies the carbon nanotube dispersion for procurement comparison.
  • Specification: Prepared using XFM 31 supports model matching against the required experiment or formulation workflow.
  • carbon nanotubes content: ; 10 wt% (The actual solid; content shall prevail). supports model matching against the required experiment or formulation workflow.
  • carbon nanotubes content: ; ~15 wt% (The actual solid; content shall prevail) supports model matching against the required experiment or formulation workflow.

Technical Specifications

Parameter Specification / Available Values
Atomfair Model AF-CNTD-WDM-P1150
Specification Prepared using XFM 31
carbon nanotubes content ; 10 wt% (The actual solid; content shall prevail).
carbon nanotubes content ; ~15 wt% (The actual solid; content shall prevail)

Selection and Use Notes

  • Match the material form and dimensional or concentration specification to the intended dispersion, composite, film, electrode, conductivity or nanocarbon research workflow.
  • Confirm the selected model, quantity, package size and application requirements before quotation.
QUOTATION DETAILS: Confirm nanotube type, concentration, solvent system, dispersion form and package size before quotation.
SPECIFICATION CONFIRMATION: Carbon nanotube content, solvent, viscosity or solid-content details are reviewed for the selected dispersion or slurry.
MATERIAL SELECTION: Aqueous, NMP, oil-based, paste and slurry forms can be matched to coating, conductive additive or composite preparation workflows.
QUOTATION REQUEST: Include nanotube type, solvent, concentration, package size and target use when requesting quotation support.
LABORATORY PROCUREMENT SUPPORT
For model selection, material specification matching, application fit or quotation confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
Supplier: Atomfair
Brand: ATOMFAIR®

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

How should the 'actual solid content shall prevail' notation be interpreted for this 10 wt% MWCNT dispersion?

The product is labeled at 10 wt% but the actual solid content may vary. The notation 'actual solid content shall prevail' means the true concentration is the measured value, not the nominal label. Researchers should confirm the actual solid content from the supplier or perform their own gravimetric analysis to ensure accurate formulation in composite or electrode preparation.

Can this water-based MWCNT dispersion be directly mixed with organic solvents for electrode slurry preparation?

The product is a water-based dispersion. If the target slurry requires an organic solvent such as NMP, direct mixing may cause aggregation due to solvent incompatibility. The product description indicates that alternative solvent systems (aqueous, NMP, oil-based) can be matched to the workflow, but this specific dispersion is water-based, so solvent exchange or use of a compatible co-solvent would be necessary.

What storage conditions are recommended to maintain the stability of this 10 wt% aqueous MWCNT dispersion?

The product description does not provide specific storage recommendations. As a concentrated aqueous dispersion of carbon nanotubes, gentle agitation before each use is recommended to redisperse any settled material. Standard laboratory practice includes storage at 4°C in a sealed container to slow microbial growth and aggregation, but users should verify with the manufacturer for long-term stability.

This multi-walled carbon nanotube dispersion in water at 10 wt% solid content (actual content per lot) is a research-grade product for nanocarbon procurement, with specification based on XFM 31 preparation. The dispersion form enables direct incorporation into aqueous-based coating, composite, or electrode workflows, but the actual solid content may vary from the nominal value, requiring lot-specific verification before critical formulation.

Positive

  • Aqueous dispersion for direct use: Supplied as a water-based dispersion at 10 wt% nominal solid content, enabling direct integration into aqueous coating, composite, or electrode preparation without additional solvent exchange.
  • Research-grade specification matching: Prepared using XFM 31 with defined carbon nanotube content, allowing model matching to specific experimental or formulation workflows for nanocarbon research.

Trade-offs

  • Actual solid content may vary: The nominal 10 wt% solid content is stated as 'the actual solid content shall prevail,' meaning lot-to-lot variation requires verification before use in concentration-sensitive formulations.
  • Limited to aqueous solvent systems: This dispersion is water-based, restricting compatibility to aqueous workflows; non-aqueous or oil-based applications require alternative solvent systems or additional processing steps.

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).