Fluorinated Carbon Nanotubes, OD 20-30 nm, length 2-10umProduct Type: Carbon nanomaterial
Research-grade laboratory product
|
|||||||||||||||||||||
|
|||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, material specification matching, application fit or quotation confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
This product requires careful specification matching to ensure compatibility with intended research workflows. No explicit processing or safety constraints are provided in the product documentation.
- Specification Matching: The material's diameter, length, and fluorine content must be verified against the target dispersion or composite formulation to avoid incompatibility.
How does the fluorine content (48-50 wt%) of these carbon nanotubes (OD 20-30 nm, length 2-10 µm) affect their performance trade-off between electrical conductivity and chemical stability for electrode or composite applications?
The product has a fluorine content of 48-50 wt% (Fwt.%) as specified, which is a key parameter for surface chemistry. While the product description does not provide quantitative conductivity or stability data, it states that the dimensional and fluorine specifications are intended for model matching against the required experiment or formulation workflow. Fluorinated CNTs typically exhibit reduced electrical conductivity compared to pristine CNTs, but the exact trade-off is not quantified in the source. For application-specific performance data, contact the technical sales team.
What compatibility constraints should be considered when integrating these fluorinated carbon nanotubes (OD 20-30 nm, length 2-10 µm, 48-50% fluorine) into polymer composite or electrode formulations?
The product's outer diameter of 20-30 nm, length of 2-10 µm, and fluorine content of 48-50 wt% are specified for matching to dispersion, composite, electrode, and conductivity workflows. The product description notes that fluorinated grades can be matched to such applications, but no specific compatibility data with polymers, binders, or electrolytes is provided. The selection notes advise matching the material form and dimensional specification to the intended workflow. For precise compatibility guidance, inquire with the technical sales team at inquiry@atomfair.com.
What handling, safety, and storage infrastructure is required for fluorinated carbon nanotubes with 48-50% fluorine content to maintain stability and prevent hazardous decomposition?
The product description does not include specific handling, storage, or safety instructions for this fluorinated carbon nanotube grade. It is classified as a research-grade laboratory product. Standard nanomaterial precautions—including fume hood use, personal protective equipment, and storage in sealed containers away from heat and moisture—are recommended. For a material safety data sheet and detailed handling protocols, contact Atomfair LLC's technical sales team at inquiry@atomfair.com.
This fluorinated carbon nanotube product (OD 20-30 nm, length 2-10 μm, Fwt.% 48-50%) provides a high fluorine content that can significantly alter surface chemistry and dispersibility for composite or electrode applications, but the narrow dimensional and functionalization specification requires careful model matching to avoid workflow incompatibility.
Positive
- High fluorine content for surface modification: With a fluorine weight percentage of 48-50%, this material offers a high degree of fluorination that can alter electronic properties and improve dispersibility in certain solvents or polymer matrices, beneficial for tailored composite or electrode formulations.
- Consistent dimensional specification for research: The specified outer diameter of 20-30 nm and length of 2-10 μm provide a well-defined geometry that supports reproducible experimental results in nanocarbon research workflows such as dispersion, film casting, or conductivity studies.
Trade-offs
- Narrow specification requires careful model matching: The product's specific diameter, length, and fluorine content range (48-50%) must be matched precisely to the intended application; deviations may affect performance in dispersion, composite, or electrode workflows, necessitating pre-quotation confirmation.
- Fluorination may limit compatibility with some matrices: The high fluorine content can reduce electrical conductivity compared to pristine CNTs and may require specialized dispersion protocols or solvent systems to achieve uniform incorporation in polymer or electrolyte systems.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
