Oil single-walled carbon nanotubeconductivepaste High concentration MWCNTs water dispersion(~14 wt%) High concentration carboxyl MWCNTs waterdispersion, 2.16-2.64 wt% content, OD 1.4±0.5 nm; Lengthum>100, model AF-CNTP-OILSW-P450

Oil single-walled carbon nanotubeconductivepaste High concentration MWCNTs water dispersion(~14 wt%) High concentration carboxyl MWCNTs waterdispersion, 2.16-2.64 wt% content, OD 1.4±0.5 nm; Lengthum>100

Product Type: Single-walled carbon nanotube material

Research-grade laboratory product

Product Overview

Oil single-walled carbon nanotubeconductivepaste High concentration MWCNTs water dispersion(~14 wt%) High concentration carboxyl MWCNTs waterdispersion, 2.16-2.64 wt% content, OD 1.4±0.5 nm; Lengthum>100 is a single-walled carbon nanotube material supplied with 2.16-2.64 wt% content, OD 1.4±0.5 nm; Lengthum>100. It is prepared for buyer comparison by model, material form, concentration or dimensional specification before quotation.

The specification table gives the measurable selection details available for this item, including material form, dimensional range, purity, content, conductivity, solvent or composition when supplied for the selected model.

Use this page to compare nanocarbon specifications before requesting a quotation, especially where functional group, concentration, geometry, package form or availability affects laboratory procurement.

Performance Features

Material form: Oil single-walled carbon nanotubeconductivepaste High concentration MWCNTs water dispersion(~14 wt%) High concentration carboxyl MWCNTs waterdispersion identifies the single-walled carbon nanotube material for procurement comparison.
Appearance: Blackpaste; Content of single-walled carbon supports model matching against the required experiment or formulation workflow.
nanotubes: 0.40 wt.% supports model matching against the required experiment or formulation workflow.
Outside Diameter: 1.4±0.5 nm; Lengthum>100 supports model matching against the required experiment or formulation workflow.
Solid Content: 2.16-2.64 wt% supports model matching against the required experiment or formulation workflow.
PVDF: 2±0.1 wt% supports model matching against the required experiment or formulation workflow.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-CNTP-OILSW-P450
Appearance	Blackpaste; Content of single-walled carbon
nanotubes	0.40 wt.%
Outside Diameter	1.4±0.5 nm; Lengthum>100
Solid Content	2.16-2.64 wt%
PVDF	2±0.1 wt%
NMP	97.6±0.1 wt%
pH	5.0~9.0; Viscositym Pa•s<=5000; (Cr/Cu/Fe/Mn/Ni/Z
n)Magnetizedmetal	(1.22/0.331/3; 6.3/0/0/0)ppb; Prepared using XFQ 046
carbon nanotubes content	; ~14 wt%; Prepared using XFM 33
carbon nanotubes content	; ~13 wt%

Selection and Use Notes

Match the material form and dimensional or concentration specification to the intended dispersion, composite, film, electrode, conductivity or nanocarbon research workflow.
Confirm the selected model, quantity, package size and application requirements before quotation.

QUOTATION DETAILS: Confirm nanotube type, concentration, solvent system, dispersion form and package size before quotation.

SPECIFICATION CONFIRMATION: Carbon nanotube content, solvent, viscosity or solid-content details are reviewed for the selected dispersion or slurry.

MATERIAL SELECTION: Aqueous, NMP, oil-based, paste and slurry forms can be matched to coating, conductive additive or composite preparation workflows.

QUOTATION REQUEST: Include nanotube type, solvent, concentration, package size and target use when requesting quotation support.

LABORATORY PROCUREMENT SUPPORT

For model selection, material specification matching, application fit or quotation confirmation, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

The product is a single-walled carbon nanotube paste with NMP solvent and PVDF binder. The specified solid content (2.16–2.64 wt%) and viscosity (≤5000 mPa·s) must be considered for uniform coating and electrode preparation.

Viscosity and solid content: The solid content range and viscosity limit affect the paste's suitability for spin-coating, doctor-blading, or slot-die coating applications.

FAQ

What is the trade-off between solid content and viscosity in the Atomfair oil single-walled carbon nanotube conductive paste (AF-CNTP-OILSW-P450) for slurry coating applications?

The paste has a solid content of 2.16-2.64 wt% with a viscosity ≤5000 mPa·s, providing a balance between nanotube loading and flowability for coating. The relatively low solid content (with 0.40 wt% SWCNTs) ensures manageable viscosity for thin-film deposition, while the PVDF content (2±0.1 wt%) and NMP solvent (97.6±0.1 wt%) maintain a stable slurry formulation.

Can the oil-based SWCNT paste be integrated with PVDF binders in NMP solvent for lithium-ion battery electrode preparation?

Yes, the paste is formulated with PVDF (2±0.1 wt%) and NMP (97.6±0.1 wt%), making it directly compatible with standard PVDF binder systems used in battery electrode processing. The NMP solvent ensures full dissolution of PVDF, while the SWCNT content (0.40 wt%) provides conductive pathways without additional dispersion steps.

What are the recommended storage conditions to prevent sedimentation or aggregation of the oil single-walled carbon nanotube conductive paste?

The paste should be stored in sealed containers to prevent NMP evaporation, which could alter the solid content and viscosity. The viscosity is ≤5000 mPa·s, indicating a semi-fluid paste; periodic agitation may be required to maintain homogeneity if stored for extended periods. Avoid exposure to moisture as the NMP solvent is hygroscopic, and maintain pH between 5.0-9.0 to preserve stability.

Assessment

This oil-based single-walled carbon nanotube conductive paste (model AF-CNTP-OILSW-P450) is a pre-dispersed formulation with 2.16–2.64 wt% solid content, 0.40 wt% SWCNTs, and 2±0.1 wt% PVDF binder in NMP solvent, designed for direct use in electrode coating or conductive additive workflows without additional dispersion processing.

Positive

Pre-dispersed NMP-based paste: The formulation includes PVDF binder and NMP solvent at controlled concentrations (97.6±0.1 wt% NMP), enabling direct incorporation into slurry preparation for battery electrode coating without separate dispersion or binder addition steps.
Low metallic impurity profile: Magnetized metal content is specified at ppb levels (Cr 1.22, Cu 0.331, Fe 3, Mn 6.3, Ni 0, Zn 0 ppb), which is critical for minimizing electrochemical side reactions in high-purity battery or capacitor applications.

Trade-offs

NMP solvent handling required: The paste contains 97.6±0.1 wt% NMP, a polar aprotic solvent with reproductive toxicity classification, necessitating proper fume extraction, personal protective equipment, and waste disposal protocols in laboratory or production environments.
Viscosity constraint for coating: Viscosity is specified as ≤5000 mPa·s, which may require dilution or shear thinning adjustment for uniform thin-film coating on substrates, adding a process optimization step depending on the coating method used.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).