Cadmium Telluride (CdTe) Evaporation Material, Pieces, 99.9%, 1-3 mm

Product Type: Compound Evaporation Material

Research-grade laboratory product

Product Overview

Cadmium Telluride (CdTe) Evaporation Material, Pieces, 99.9%, 1-3 mm is a research-grade compound evaporation material supplied as Pieces with 99.9% material specification and Pieces 1-3 mm size range for vacuum thin-film deposition workflows.

This evaporation material is prepared for laboratory procurement where material identity, purity, physical form, pack size and deposition hardware must be confirmed before ordering. The listed configuration supports selection for Thermal evaporation or low-power e-beam by RFQ using Quartz/alumina/graphite crucible, Ta/W boat, or Knudsen cell by RFQ | Sheet2 hardware: – | W,Mo,Ta | W | Mo,W,Ta | -.

Available pack sizes are 25g / 100g / 500g / 1kg. Buyers should confirm deposition source geometry, required quantity, certificate requirements and shipment conditions before quotation.

Performance Features

Defined material identity: Cadmium Telluride (CdTe) for clear procurement and deposition-process matching.
Specified physical form: Pieces with Pieces 1-3 mm sizing to support source loading and evaporation review.
Purity or composition listed as 99.9%, allowing comparison between standard, high-purity and RFQ-controlled grades.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-CDTEPCS-3N13MM
Material	Cadmium Telluride
Formula	CdTe
Product Type	Compound Evaporation Material
Form	Pieces
Purity / Composition	99.9%
Particle Size / Dimensions	Pieces 1-3 mm
Minimum Order Quantity	25g
Available Pack Sizes	25g / 100g / 500g / 1kg
Indicative Price Tiers	25g: USD 240; 100g: USD 460; 500g: USD 1150; 1kg: USD 1350
Evaporation Source	Quartz/alumina/graphite crucible, Ta/W boat, or Knudsen cell by RFQ \| Sheet2 hardware: – \| W,Mo,Ta \| W \| Mo,W,Ta \| –
Evaporation Method	Thermal evaporation or low-power e-beam by RFQ
Melting Point	1,092
Density	5.85
Z-Ratio	0.98

PROCUREMENT CHECK: Confirm model, purity, form, size range, pack size and deposition-source compatibility before quotation.

DOCUMENTATION REVIEW: Certificate, safety data sheet, shipment condition and export requirements can be reviewed against laboratory use requirements.

APPLICATION MATCHING: Evaporation source hardware and process route should be matched to material behavior, melting point and film requirements.

INQUIRY NOTE: Include the required model, purity, form, size range and quantity when requesting quotation support.

LABORATORY PROCUREMENT SUPPORT

For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.

INQUIRY: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

CdTe

Cadmium Telluride Evaporation Pieces 99.9% ATOMFAIR®